Posted to: Software - General
a week ago Dear Team,We are currently running firmware version YB.16.11.0026 on the Aruba J9782A (2530-24) switch. We would like to understand whether any known bugs or limitations have been reported for this specific firmware version, and how such issues could... Posted to: ProLiant Servers (ML,DL,SL)
Saturday I have an HP ProLiant ML310e Gen8 v2 with an issue on FAN1 (rear system fan / CPU zone).Facts:Both fans are original HP fans.Both fans work correctly.Both motherboard fan headers work electrically.If I swap the fans, the behavior follows the header, ... Posted to: ProLiant Servers (ML,DL,SL)
Saturday I have a DL380 GEN10 with a cage that has the 2 nvms and 3 pciex slots and I wanna make sure I did my research that they indeed spent the $$ to have a 2nd nvme slot [labelled 14 on my riser] but actually is not usable? Slot 13, nvme #1 works fine, bu... Posted to: Disk Enclosures
Friday Environment:DL360 Gen8, with P822 installed. One EMC SAE shelf, one HP M6720 shelf, both populated with 24 drives. Each had one array / logical drive defined on it. After trying to configure both for MPIO, upon reboot neither array /. LD was detected... Posted to: ProLiant Servers (ML,DL,SL)
07-17-2025 Had case open with HPE Support for over a month. Have had a repalcement systemboard nad CPU and a new Microserver.Wanted to start this thread.On a new updated Microserver with latest BIOS,iLO & other firmwares I can flash from iLO. I cannot even get ... Posted to: ProLiant Servers (ML,DL,SL)
3 hours ago My Server is ML 30 Gen 11 and current resolution setting is 1680*1050. Refresh rate 85 Hz. and due to this screen is laggy and choppy. is i try to cvhange my screen resolution to Recommended 1920*1080. RGB lights comes up on screen. I am using DP por...
Posted to: MSA Storage
12-16-2025 MSA 2070 예비 디스크 - 동적 예비 디스크 기능을 설정됨으로 변경하고 싶습니다.Storage Management Utility 에서 어떻게 설정하면 되겠습니까? Posted to: MSA Storage
3 weeks ago Hello,I'm looking for a monitoring tool that can help to detect MSA storage devices failure events, alerts, hard drive failures, etc., in real time.I tried to monitor the device via PRTG, but it is limited and does not provide a comprehensive real-ti... Posted to: ProLiant Servers (ML,DL,SL)
Sunday Hi,Can someone help me on setup LDAP on iLO 6.I already filled in the info for Directory Server Settings.CAC LDAP Service Account: IDRACldapadminiLO Object PasswordDirectory Server AddressDirectory Server Port: 636Certificate Status: LoadedWhen I tes...
Posted to: Software - General
Thursday Hi thereI have been tasked with putting together a system to allow me to test faulty and non faulty AMD MI250 Gpu's (Hpe Branded) Part Number'sP41932-001 / P41354-001 / 100-300000005 and P41933-001 / P41858-001 / 100-300000016I am looking for help on...
