Posted to: ProLiant Servers (ML,DL,SL)
3 weeks ago Hi, I have a bunch of ML350e G8 V2 servers and I am looking for to enable the UEFI boot which apparently is not a streight forward task and yet someone looks like manage to do this exact same with the ML350p Gen 8 in this forum shown in the link bel...
Posted to: Servers - General
2 weeks ago We are using the oneview for vcenter plug into update and apply SPP's to our hosts. However when running it, it will usually skip 1 or 2 firmwares and then come back and say non-compliant and won't continue to the next host. If I re-run the SPP it wi...
Posted to: ProLiant Servers (ML,DL,SL)
11 hours ago Just an FYI for future posterity because it took a support ticket to confirm this behavior in my new DL360 G11 with MR408i-o controller...Any SATA SSD used with a hardware storage controller will be identfied as a Hard Drive in Windows Server OS. I ... Posted to: HPE Primera Storage
Wednesday Hi,we are facing the issue that we cannot download the newest firmware update for our Alletra 6050. Instead it is greyed out and hovering over it create a popup that says "2140_FW_Update".We found this thread which shows a similar but not same behavi... Posted to: HPE Morpheus VM Essentials
14 hours ago I have been attempting to install the latest version, 8.0.8 on a DL360 Gen 10When deploying the manager, the progress bar jumps immediately to 60%, then slowly crawls to 99%, and eventually after about an hour or so it finally fails out with this mes...
Posted to: HPE Morpheus VM Essentials
Saturday I am deploying a Windows virtual machine after creating a template.During provisioning, I entered the host name and IP address. After deployment, I confirmed that the host name was as entered, but the IP address remained the same as in the original i... Posted to: Software - General
15 hours ago "Hello, I need to update the firmware of an HPE 1950 switch (JG961A). System info: Boot ROM: 147 - Software: 7.1.070 Release 3506P11. Thanks."
Posted to: HPE 3PAR StoreServ Storage
a week ago Hi all, hoping for some insight into setting up a 3Par testing station. I have been tasked to setup a 3 Par testing station for 3 Par drives, as I have never worked with any of these particular server's I am looking for help.What would I need to run ... Posted to: ProLiant Servers (ML,DL,SL)
15 hours ago Hello,I work with 'ProLiant DL360 Gen11' with 'RHEL 9.5'.I want to use ASM to modify, for example, the Power Regulator Settings.But when I try to specify iLO credentials, I have the following error.# amscli set -u <ilo_username> -p <ilo_password>Unab... Posted to: HPE Morpheus VM Essentials
16 hours ago Hello, we currently use several VMware clusters on Proliant hardware, whose firmware we update using HPE OneView routines. We are currently evaluating switching to HPE VM Essentials, but we don't currently see a way to automate the firmware updates f...
