HPE Nimble Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Hewlett Packard Enterprise Community

Join the conversation with experts and colleagues to get advice, discuss issues, and find solutions
Posted to:
Original author:
Hi, I have 2 questions regarding 10gig iSCSI latency. 1. Each time we upgrade our HF20 array, we are bumbed with email alerts from Veeam ONE reporting too high read latency from the volumes. Alarm: Cluster shared volume 2012 read latency Time: 18-03-...
Posted to:
Original author:
Hi All, I have been trying to script out some LUN creation with the PSTK and noticed that some parameters come back a unrecognized. Below is an example. PS C:\WINDOWS\system32> New-NSVolume -name test -size 10240 -perfpolicy 0316a3d10c430292620000...
Posted to:
Original author:
Configuring Nimble for replication there's the option to choose between the Management and Data Network for replication traffic My question is if the chosen replication network , in our case the management , is broken will the replication continue us...
Posted to:
Original author:
Hi All, I have been trying to script out some LUN creation with the PSTK and noticed that some parameters come back a unrecognized. Below is an example. PS C:\WINDOWS\system32> New-NSVolume -name test -size 10240 -perfpolicy 0316a3d10c430292620000...
Posted to:
Original author:
Hi, How do NWT and the array prioritize network interfaces, when there is both 1 gigabit and 10 gigabit mpio routes to and from the array?
Posted to:
Original author:
Hey guys. Looking for an alternative to the $8K (times 2) PCI-10GTX1 interface cards from HP. I was told that it is a CentOS system in the backend, and normal PCI cards that are suppoeted by the OS would work. (I hope this is true). Anyhow, looking a...
Posted to:
Original author:
This script will create the rule for Nimble volumes to use the RoundRobin PSP policy and set the policy on any existing Nimble volumes. The script will take an argument of the vCenter server or the ESX host. If it is not provided it will prompt for t...
Posted to:
Original author:
With 1 gig networks it is important to tune per path settings for maximum throughput. The default of 1000 IOs per path can cause micro bursts of saturation and limit throughput. I've done a fair amount of testing and found that the best setting is to...
Posted to:
Original author:
jrich523/NimblePowerShell · GitHub Built and tested in Version 3 (v2 compatibility will be validated but it should be fine) Install Run the following line in PowerShell iex (new-object System.Net.WebClient).DownloadString(' https://raw.github.com/jri...
  • Legend
  • New MessagesNew Messages
  • No New Messages No New Messages
  • Hot TopicHot Topic
  • Replied-to Thread Replied-to Topic
  • Read Only ThreadRead-Only Topic