Midrange and Enterprise Storage
Midrange and Enterprise Storage
Find answers to your questions about HPE Midrange and Enterprise Data Storage products and solutions in this forum.
1756244 Members
2361 Online
108843 Solutions
New Discussion

Join the conversation with experts and colleagues

Posted to:
Original author:
Hello, We need to rename several virtual volumes in our HPE Primera system. However, these virtual volumes are members of a Remote Copy group. The documentation states, "It is not possible to rename a virtual volume that is already associated wi...
CRD
Posted to:
Original author:
CRD
Good day Apologies if there is already a thread for this topic, I could not find any. Does anyone know if it is still possible to buy the serial cable kit for 3PAR storage? Thanks
Posted to:
Original author:
Just got my first experience book from the XP Storage mod to save my xp levels. I noticed that when I retrieve my xp from the book by shift + right click that it consumes 2 levels of XP each time. I've used XP Storage's books in other mods and this d...
Posted to:
Original author:
Can you create more than one host definition for the same host initiator so that we can have one host definition in one Virtual Domain and the other in another Virtual Domain? But effectively its the same host. Looking to present volumes from two dif...
Posted to:
Original author:
Does primera support CAW?
Posted to:
Original author:
Can I somehow update the firmware of 3PAR StoreServ 20000 and it's expander under Windows PE? My server controler for this JBOD is DL360p G8 with P822 [ Moderator edit : Erased the confidential info.]
Posted to:
Original author:
Everyone, please support us. I found a 3PAR7200 in company supplies. The configuration is as follows. ・7200 Chassis ・Slot1 Node 3PAR OS 3.2.1.46 ・Slot0 empty ・Service Processor 4.x ・PCM x2 ・HDD x6 I purchased an additional 7200Nodes. 3PAR OS 3.2.2.70...
Posted to:
Original author:
https://www.dropbox.com/s/do8sgmnepmxxeym/3PAR_Management_Console_4.7.3_QR482-11188.iso?dl=0 Check if this is still valid
Posted to:
Original author:
Hi this is the procedure I have RemovePD Step Command Purpose 1 setpd ldalloc off <DiskID> To stop data to drive - Repeat for all PDs 2 showpd -s Make sure disks are in Degraded state 3 movepdtospare -f -vacate -nowait <DiskID> Vacate all...
  • Legend
  • New MessagesNew Messages
  • No New Messages No New Messages
  • Hot TopicHot Topic
  • Replied-to Thread Replied-to Topic
  • Read Only ThreadRead-Only Topic
Top Kudoed Authors Last 30 Days
Author
Kudos
Cali Avatar
3
Top Solution Authors Last 30 Days