Alletra MP switched config with Aruba switches

[jlangmead]

Hi

We have an Alletra MP 4 node array with the Aruba 8325 switches included. We want to configure the management ports on these switches but cannot find any documentation on how to do this. With typicaly Aruba 8325 switches the initial config of the management port does not require a password on first login, however, this does not seem to be the case and we are unable log into the switches to apply a management IP address. 

Please can someone confirm the process required to setting a management IP address on these switches and\or provide the login credentials required to get initially logged onto the switch via the serial console.

many thanks

[Cali · Accepted solution]

These switches are completely managed by the storage; it is not intended or permitted for you to connect or configure anything yourself.

Cali

[jlangmead]

Thanks - that's all good then  :>)

[Sunitha_Mod]

Hi @jlangmead,

That's Perfect! 

We are glad to know your concern has been addressed.