C7000 blade issue

[Liyanz]

One blade system having redundant LAN connectivity through VC on Bay1 port X3 and VC on Bay2 port X3. Both port was up and working but system traffic were not getting through.

once disconnect one LAN cable from any X port, traffic getting through but as soon as redundant LAN up, connectivity aborted.

[Suman_1978]

Hi,

There could be issues with LAN cables, switch, SFP/QSFP or even the firmware on the VC and OA.

https://support.hpe.com/hpesc/public/docDisplay?docId=a00102211en_us
https://support.hpe.com/hpesc/public/docDisplay?docId=a00102212en_us

Thank You!
I work with HPE but opinions expressed here are mine.

[ManBha]

Hello,

Is this a new configuration, or it was working fine before?

thanks.

[support_s]

Hello,

Let us know if you were able to resolve the issue.

If you have no further query, and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.