1GB support on the HPE 5930 24-port 10GBASE-T and 2-port QSFP (JH182A) module

[mirrmurr]

Hi,

does somebody know, if the HPE 5930 24-port 10GBASE-T and 2-port QSFP+ with MACsec Module (JH182A) supports also 1GB speed? I can't find any Datasheet.

Thanks.

[parnassus · Accepted solution]

AFAIK the right answer should be "Yes, it does".

The HP 5930 24-port 10GBase-T and 2-port QSFP+ with MacSec Module (JH182A), alias LSWM124XGT2Q, should support Gigabit Ethernet links on its 1/10G ports. See here: all 24 ports are 1/10 Gbps Full Duplex, MDI/MDI-X and Auto-Sensing.

Moreover, in the HPE FlexFabric 5930 Part List (see here), 1/10G are specified for JH182A:

"5930 24p 10GBase-T and 2p QSFP+ Module with MACsec - Includes 24 RJ45 1G/10G BASE-T autosensing ports and two Quad Small Form-factor Pluggable Plus (QSFP+) ports - Requires CAT 6A or 7 cable for RJ45 ports and accepts 40GbE transceivers / cables only"

[mirrmurr]

Hi parmassus! Thanks for the good news and for the documentation. I've not know, the module was renamed.