Howto see IP address of WLAN clients in HP850 UWW setup (locally forwarded WLAN service)

[tdeserranno]

Though I have 'arp-snooping enable' configured on my HP850, I still can't see IP address of my clients

'dis arp-snooping' only shows IP addresses in VLANs where the HP850 is configured with L3 interface.

My WLAN clients are locally forwarded onto VLAN 2 - not tunneled through the controller and my controller has no L3 interface VLAN 2.  Is that the reason why I do not see any IP address of VLAN 2 WLAN clients ?

--------------------------------------------------------------------------------
MAC Address    User Name            APID/RID IP Address                     VLAN
--------------------------------------------------------------------------------
0023-685f-b0b4 0023685fb0b4         18  /1   0.0.0.0                        2
0023-685f-b0bc 0023685fb0bc         40  /1   0.0.0.0                        2

[JesseR]

Do you have  IP Verify Source  enabled on the service template SSID?

[tdeserranno · Accepted solution]

Solved.

I had to make sure that my controller had a layer 2 interface in VLAN 2 where my clients end up once authenticated.

As the AP's forwarded locally into VLAN 2, I had only defined the VLAN 2 on the controller but did not need any interface into this VLAN 2.  Client connections worked perfectly this way....but the 'arp-snooping enable' could not do its job to snoop for ARP's in VLAN 2 

thx

[Transport]

You can enable this function by using this cli command:

wlan client learn-ipaddr enable