HPE Community
Disk
1848744 Members
6657 Online
104036 Solutions
New Discussion

connect LVD to HSC FW SCSI

 
SOLVED
Go to solution
Sergejs Svitnevs
Honored Contributor

‎06-26-2006 07:45 PM

‎06-26-2006 07:45 PM

connect LVD to HSC FW SCSI

Hi all

Is it possible to connect a HP disk system 2300 (with SCSI LVD interface) on a K380 A2969A interface card (HSC FWD Diff SCSI for SCSI-2 ports) ?

Thanks
0 Kudos
3 REPLIES 3
Torsten.
Acclaimed Contributor

‎06-26-2006 07:56 PM

‎06-26-2006 07:56 PM

Solution

Re: connect LVD to HSC FW SCSI

If you connect it, you will destroy your disks. The answer is NO, it is not compatible.

The disk system is Low Voltage, the HBA is High Voltage.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Warren_9
Honored Contributor

‎06-26-2006 07:57 PM

‎06-26-2006 07:57 PM

Re: connect LVD to HSC FW SCSI

hi,

take a look @ http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=42779

the A2969A is a HVD device and which is incompatible with SE and LVD devices.

GOOD LUCK!!
0 Kudos
Sergejs Svitnevs
Honored Contributor

‎06-26-2006 08:32 PM

‎06-26-2006 08:32 PM

Re: connect LVD to HSC FW SCSI

Thanks a lot
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.