1832330 Members
3191 Online
110041 Solutions
New Discussion

The disk light is green but its not visible in the Commandview

 
Faizer Jameel
Frequent Advisor

The disk light is green but its not visible in the Commandview

Hi All
I have a va7410. In the Master disk array [ conroller unit] I have a disk that is is not visible in the commandview or using the armdsp command. The disk lightis green but its not blinking. I replaced it thinking its a fault. Still the disk has not been identified.
The array status indicates good.
any idea.
Thanks
faizer
3 REPLIES 3
Torsten.
Acclaimed Contributor

Re: The disk light is green but its not visible in the Commandview

Please post a

# armdsp -a

What is the slot of the questionable disk?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   

Re: The disk light is green but its not visible in the Commandview

Connect to serial port on controller and check disk status, armdsp -d
Torsten.
Acclaimed Contributor

Re: The disk light is green but its not visible in the Commandview

The serial command is

# vfpdsp -d

or just

# dsp -d

but "armdsp -a" issued from the OS gives much more informaion.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!