Inactive volume identification

[lakshmsingh]

I have an HP 3PAR 7400 with nearly 1000 virtual volumes. I need to identify which virtual volumes are inactive. Is there a command or option available to perform this task?

[AnilKT · Accepted solution]

Hi lakshmsingh,

Please run the command showvv -state.
This command will give you the information about the status of all the virtual volumes on your HPE 3PAR 7400.

For more information on the commands, please refer to the link:

https://support.hpe.com/hpesc/public/docDisplay?docId=sd00005325en_us&docLocale=en_US
page no: 498

Hope this helps.!

Regards

Anil

[Amjad_kasem]

Hello, what is the OS you use right now ?

[support_s]

Hello,

Let us know if you were able to resolve the issue.

If you have no further query, and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[puneetgarg]

given doc link not showing anything

[AnilKT]

Hi puneetgarg,

Please refer to the updated link for more information on HPE 3PAR Commands.

https://support.hpe.com/hpesc/public/docDisplay?docId=sd00005325en_us&docLocale=en_US

Hope this helps.!

Regards

Anil