Query: Unexporting a Volume from a host set

[hpe_guy22]

I do not see any option to unexpor or remove a volume from a host set.  My host set does not have any members anymore.  I am attempting to unexport the 1 volume so I can delete the host set. 

How do I unexport a volume from a host set?

[support_s]

System recommended content:

1. HPE Alletra 9000: UI 1.2 User Guide | Deleting volumes from an application set

2. HPE Primera 600: UI 1.4 User Guide | Deleting volumes from an application set

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[sbhat09]

Hello @hpe_guy22,

Can you please provide some more details of the challenge you are facing? How did you try to unexport, the exact steps? Is there any error you are getting?

The procedure to unexport a volume are:
1. From SSMC select the hostset from the hostset list -> Actions -> Unexport -> select the volume by clicking on it (even if it the only volume) -> click on 'unexport'.
Or
2. From SSMC select the volume from the volumes list -> Actions -> Unexport -> select the host/hostset -> click on 'unexport'.

Regards,
Srinivas Bhat

If you feel this was helpful please click the KUDOS! thumb below!
Note: All of my comments are my own and are not any official representation of HPE.

[hpe_guy22 · Accepted solution]

Issue was resolved by HPE Support by using a command from the command line.  

# removevlun -f vvname 18 set:hostsetname 

[hpe_guy22]

My issue was on the Alletra following the peer motion from the 3PAR.  There was/is no option to unexport on this host set.