Help help - V-class server not booting

[Popy]

Command: BOOT
Boot aborted - CPUs are incompatible, check warnings above.

This what I see when I try to boot my V2200 server,

Any thoughts please ?

Vijay

[Popy]

More inputs....


-------------------------------------------------------------------------------
PDC Firmware Version Information
PDC_ENTRY version 4.3.4.0
POST Revision: 5.3.0.0
OBP Release 4.3.4, compiled 01/08/03 10:29:10 (3)
SPP_PDC (64-bit) Release 3.2.1 (09/14/01 09:07:19)
-------------------------------------------------------------------------------

Proc type Proc# Proc Rev Speed State Dcache Icache I-prefetch
---------- ----- -------- ------- ------- ------- ------- ----------
HP,PA82000 1 5.1 200 MHz Active 2048 KB 2048 KB Off
HP,PA82000 2 4.0 200 MHz Active 2048 KB 2048 KB Off
HP,PA82000 3 5.1 200 MHz Active 2048 KB 2048 KB Off
HP,PA82000 4 5.1 200 MHz Active 2048 KB 2048 KB Off
HP,PA82000 6 4.0 200 MHz Active 2048 KB 2048 KB Off
HP,PA82000 7 5.1 200 MHz Active 2048 KB 2048 KB Off
HP,PA82000 8 4.0 200 MHz Active 2048 KB 2048 KB Off
HP,PA82000 9 5.1 200 MHz Active 2048 KB 2048 KB Off
HP,PA82000 10 5.1 200 MHz Active 2048 KB 2048 KB Off
HP,PA82000 11 4.0 200 MHz Active 2048 KB 2048 KB Off
HP,PA82000 12 5.1 200 MHz Active 2048 KB 2048 KB Off
HP,PA82000 14 5.1 200 MHz Active 2048 KB 2048 KB Off
HP,PA82000 15 5.1 200 MHz Active 2048 KB 2048 KB Off
0 Disabled

16384 MB memory installed 0 MB CTI cache configured (total, all nodes)

Primary boot path = 2/0/0.0.0
Primary boot arguments =
Alternate boot path = 2/0/0.5.0
Alternate boot arguments =
Console path = 15/1
Keyboard path = 15/1

[*** Manufacturing (or Debug) Permissions ON ***]

System is HP9000/800/V2200 series

[Popy]

Command: bo pri
Boot aborted - CPUs are incompatible, check warnings above.
ERROR : unknown CONSOLE command.
Command: BO PRI
Boot aborted - CPUs are incompatible, check warnings above.
ERROR : unknown CONSOLE command.
Command: BO pri
Boot aborted - CPUs are incompatible, check warnings above.
ERROR : unknown CONSOLE command.

[Torsten.]

Sorry, I can't remember much details for this old box.

"check warnings above" - any warnings above?

You are probably not on the BCH console, but on the "legacy".

Anything changed? More details? More messages?

[Popy]

CPU-0 is dead...getting it replaced by HP.

[Torsten.]

OK, now I can see it too in the last line:

"0 Disabled"

If you cannot currently boot but you want to, consider to swap the CPU boards, so another cpu becomes number 0.