HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

unable to get console

 
SOLVED
Go to solution
Highlighted
Occasional Advisor

unable to get console

HI I unable to get console from MP. Please help.

I'm not able to get login prompt from another server in the network i.e. either by telnet, rlogin or ssh. Please help
7 REPLIES 7
Highlighted
Honored Contributor

Re: unable to get console

If the server is hung, try to TOC, not to reset it via RS command. This will create crash dump files for analisys.

regards,
ivan
Highlighted
Occasional Advisor

Re: unable to get console

Thank u Ivan. But is there any other graceful way.
Highlighted
Honored Contributor

Re: unable to get console

If you cannot login via any available method - ssh, telnet, remsh, console the remaining workaround is if you have OVO installed to execute remote commands from the server (opcragt, opcrdeploy).

regards,
ivan
Highlighted
Honored Contributor
Solution

Re: unable to get console

Hy,

But have you got access to the GSP console of the RP ?

try and access the GSP/MP console, via lan if you have it configured, if note you have to go to the server phisically and connect via serial cable.

Windows?, no thanks
Highlighted
Honored Contributor

Re: unable to get console

I agree with Orange

Try a serial cable to a laptop and use hyper terminal.

The most common settings are:

Com1
9600 Bits per second
8 data bits
Parity none
stop bits 1
flow control none or HardWare
Highlighted
Trusted Contributor

Re: unable to get console

Try to ping MPLAN ip & try.

Regards,
Sudha
Highlighted
Occasional Advisor

Re: unable to get console

Thanks a ton Orange

I logged in through MP SERIAL console and got the console. As soon as i logged in the problem got solved with all logins working now. But please tell me what was the problem???? i have not been able to diagnose it and it may happen again in future.