5406zl Crash after deleting VLAN

[Phix]

Hi there,

I just want to report that one of our cores crashed after deleting a VLAN ;-)

5406zl (J8697A)

Firmware: K.15.10.0009

It rebooted automatically after the crash and gave me that information after the logon:

Saved crash information:
NMI event SW:IP=0x00e01f1c MSR:0x02029200 LR:0x00e02da4
 cr: 0x24000400 sp:0x02af4008 xer:0x20000000
Press any key to continueD=0xab31000

a "show log" has this in the last entries

swcore1.mgmt# sh log
 Keys:   W=Warning   I=Information
         M=Major     D=Debug E=Error
----  Event Log listing: Events Since Boot  ----
I 07/16/13 18:48:33 00061 system: -----------------------------------------
I 07/16/13 18:48:33 00063 system: Mgmt Module 1 went down:  07/16/13 18:46:13
M 07/16/13 18:48:33 00064 system: NMI event SW:IP=0x00e01f1c MSR:0x02029200
            LR:0x00e02da4

Things I did before:

logged on via ssh

swcore1.mgmt# configure 
swcore1.mgmt(config)# vlan 501
swcore1.mgmt(vlan-501)# name "atv-office-gnd"
swcore1.mgmt(vlan-501)# ex
swcore1.mgmt(config)# no vlan 501

After the "no vlan 501" it did not respond anymore.

And yes, this was a new created VLAN (I had to delete it because I messed the VLAN IP up).

Switch is up and running again - and I can create and delete VLANS withou an issue again.

So please consider this just as an report to HP ;-)

greetings,

phix

[paulgear]

Hi Phix,

This is not the place to report bugs. You should contact HP support for that; HP staff do not regularly monitor these forums for bug reports.