HPE Community
HPE Aruba Networking & ProVision-based
1829637 Members
1591 Online
109992 Solutions
New Discussion

How to repeat the VLAN in more than one Switches

 
peyushzach
Frequent Advisor

‎09-20-2011 06:02 AM

‎09-20-2011 06:02 AM

How to repeat the VLAN in more than one Switches

I have 5  2910al-48G Switches. 20 Vlans in all together,  All my vlans terminating in its own Switch ( gateway for the VLANs is in its own Switch ). Switch to Switch is connected With IP’s assigned on it. Diagram attached describes that, Default RIP enabled.

My question is

- What if I have VLANs repeating on more than one switches? How I can achieve that ?

Please help

0 Kudos
2 REPLIES 2
peyushzach
Frequent Advisor

‎09-21-2011 05:23 AM

‎09-21-2011 05:23 AM

Re: How to repeat the VLAN in more than one Switches

Hi,
It will be really greatful if any one can advise me in this,

Thanks
0 Kudos
ocramas
Occasional Contributor

‎09-21-2011 07:54 AM

‎09-21-2011 07:54 AM

Re: How to repeat the VLAN in more than one Switches

You should configure GVRP on your switches if you want something similar to the cisco's vtp.

 

You can find all the guides at hp.com

 

Thanks,

0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.