Load Balancing in Secure Path for W2k

[Fernando Ferri Wollner]

I have two models of HBA installed in one server, QLA2310F and QLA2340. Using the Secure Path Manager, I can see that the server has 4 paths (what is correct) to each LUN in EVA, but I release that the Secure Path is not doing Load Balancing for the 2 HBA´s. I checked that, looking into the switches. There is no activity in the second port.
Any ideas what it can be?

Thank

[Uwe Zessin]

It is disabled by default. Can you run an
C:\Program Files\Compaq\SecurePath\SPMgr> spmgr display

??

[Fernando Ferri Wollner]

Uwe, i have already enable it by Secure Path Manager.

Thanks

[Richard Perez]

as Uwe said, post the results of "spmgr display"

[Fernando Ferri Wollner]

Richard, the attachement has the output.

[Uwe Zessin]

That is not the output from SPMGR, but I suggest you change the load balancing policy to round-robin and put some load on the server, again. It is possible that you don't create a high enough load for the current policy to warrant using the other adapter.