looking for updated hsdsa-script-alpha.exe for HSG80

[Peter Chung]

Greetings to all, and thanks for reading.

I'm looking for an updated version of hsdsa-script-alpha.exe to use with an HSG80. I tried looking for hsGsa-script-alpha.exe, but I'm guessing that HP must have changed the naming convention since I didn't get any hits at all. Could someone please point me in the right direction?

Failing that, perhaps someone else could still shed some light on the problem we're having. I would like to configure an HSG80 from a remote host using a sequence of single commands. Ideally, it would be something like a sequence of rsh commands that are issued from a linux client to the HSG80. I don't think the HSG80 supports rsh input, but if anyone knows of anything comparable, I'd be much obliged. Thank you.

[Jeffrey Goodwin]

hsdsa-script-alpha.exe is available here:

http://www.djesys.com/freeware/vms/

[Peter Chung]

Thanks, Jeff. I have hsdsa-script-alpha.exe, but I'm looking for an updated version that works with hsg80 controllers. I'm guessing that it would be called hsgsa, but perhaps not.

Do you know if the version at djesys works with HSG80's?

[Jeffrey Goodwin · Accepted solution]

I misunderstood your question.

You want HSZTERM to be used with SET HOST/SCSI. HSZTERM is available from the same place. HSZTERM will work with the HSZ/HSG SCSI controllers.

-Jeff

[Peter Chung]

Thanks, Jeff. You have perfectly answered my question. I didn't know the name of the new program (if indeed a new program existed at all.) I'll post back with what results I find. Thanks again!

[Uwe Zessin]

Watch out!

Last time I checked, HSZTERM did not support the agent interlock protocol. You risk hanging the controller if there is concurrent access from the maintenance port, an SWCC or HSG element manager agent.