HPE-VME

[AlexGaab]

Estoy colocando una dirección ip en el hipervisor ejemplo  192.168.xxx,xx6 para cuando configuro la consola estoy colocando otra dirección ip para que me despliegue el morpheus con otra dirección ejemplo 192.78.xxx.xx7 ¿es posible hacer ese cambio de direcciónes o deben estar dentro del mismo grupo de ips que se le asignó al hipervisor?

**Google Translate**

I am placing an IP address in the hypervisor, for example 192.168.xxx,xx6, so when I configure the console I am placing another IP address so that Morpheus is displayed with another address, for example 192.78.xxx.xx7. Is it possible to change the addresses or should they be within the same IP group that was assigned to the hypervisor?

[Arnout_Verbeken]

nodes and manager can be in a different subnet/vlan, but you will have to configure it correctly in hpe-vm.

You need to create your management network on the host (192.168.x.x) (done during install of the node) and also already create a "compute" network (that your manager will use).  This compute network should not have an IP address configured on the node itself.  So just create the network (with hpe-vm or netplan).

During setup of the manager, choose "use compute network" and give the name of your compute network.