Ip Range Quorum

[ThorstenBolz]

Hello together…
I have an understanding question….
Must the ip of the quorum witness be in the Range of the replication Network?
We have a direct Connection between the two rcip interfaces of the allerart and want to setup the quorum…
Thank you!

[buzzsubash]

Hello,

The Witness does not need to be on the same subnet as the array group, but its IP address must be routable from the array group’s management network. The Witness can be installed in a different data center or even in a cloud environment as long as the round-trip time (RTT) between the Witness and the two arrays is 250 milliseconds or less.

[support_s]

System recommended content:

1. HPE Alletra 9000: Installing and Updating HPE Quorum Witness using the CLI | Troubleshooting setup of Quorum Witness - 4.0.x, 5.0.x, 6.0.x, or 6.1.x

2. Installing and Updating HPE Quorum Witness for HPE Primera and HPE 3PAR | Troubleshooting setup of Quorum Witness - 4.0.x, 5.0.x, 6.0.x, or 6.1.x

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[thorsten1]

Thanks for your answars...

but my creation of qw failed with Error: No route to Quorum Witness at 172.21.xx.xxx from any node.

im trying without ssl

I set for testing purpose the qw vm in the same net as the storage system management ip.

From the qw server i could succesfull ping the 2 storage systems.

[buzzsubash]

Hi,
What is the array model please? Is this an allertra 5k/6k model ?

[thorsten1]

It is an alletra mp b10000