How can i remove Global spare on MSA 2050

[Benjonoug]

Hello,

I have a global spare on a particular pool and want to remove it from this pool and use it at a standard disk with 4 others to create an another pool

regards

[SUBHAJIT KHANBARMAN_1]

@Benjonoug 

Please note Global spare configured at the entire System level and it's not Pool specific.

You can follow Command Line Guide (Page 119) to delete the Global spare,

https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00017709en_us

To Remove global spare 1.22.

# remove spares 1.22

You can also refer SMU guide (page no 93),

https://support.hpe.com/hpesc/public/docDisplay?docId=a00017707en_us

To remove global spares

1.In the Pools topic, select Action > Manage Spares. The Manage Spares panel displays.

2.In the Current Spares section, click on available the spares to remove.

3.Click Remove. The system updates the global spares and a confirmation panel displays.

4.To close the confirmation panel, click OK.

Hope this helps!
Regards
Subhajit

I am an HPE employee

If you feel this was helpful please click the KUDOS! thumb below!

***********************************************************************

[Parvez_Admin]

@Benjonoug , Did you manage to get the issue resolved. Let us know