Networking
All Networking boards are read-only. Please visit https://community.arubanetworks.com/discussion to start a discussion
1845019
Members
1542
Online
110233
Solutions
Latest Articles and Discussions
Best way of connecting switches on different floors?
Posted to: Switches, Hubs, and Modems
09-26-2020 Hi all!I have got the task to connect to floors in one of our offices, never done it before so need help.On floor 1 I have 3 HP2530-48G, they are stacked and connected through the SPF+ ports to e ...
0
Kudos
5009
Views
4
Replies
Dual 802.1X and MAC-Based Port-Access on J9086A / #R.11.122
Posted to: LAN Routing
09-25-2020 Hello,I need to use both 802.1X and Mac-based authentication on my J9086A with firmware #R.11.122. The 802.1X part is working but I cant get the switch to do mac-based authentication too. On my n ...
0
Kudos
5675
Views
1
Reply
HP 1910-8g jg348a Switch Application program does not exist.
Posted to: Web and Unmanaged
09-25-2020 Please help me , how can i start application ********************************************************************************* ** HP 1910-8G Switch BOOTROM, Version 163 ** ****************** ...
0
Kudos
3110
Views
1
Reply
HP 5920 - Lock down source user to access device
Posted to: LAN Routing
09-25-2020 Ive been given a few HP 5920 switches to manage and first task is to lock down users to access the HP host e.g my source ip address. I have experience in managing Cisco switches. Via ...
0
Kudos
6206
Views
2
Replies
Howto nat sub interface
Posted to: Comware Based
09-25-2020 Hi,Scenario is:PC -> GE1.RouterA.GE1 -> GE0.RouterB I have this config in RouterA:nat address-group 2 address 192.168.123.3 192.168.123.3 interface GigabitEthernet0/1 port link-mode ...
0
Kudos
3210
Views
3
Replies
Problem with debugging ip packet acl
Posted to: Comware Based
09-24-2020 Hi, I have this acl:acl advanced 3100 rule 200 deny tcp destination-port eq 22 rule 209 deny udp destination-port eq ntp rule 300 permit ip On terminal i put this:termina ...
0
Kudos
2061
Views
0
Replies