Well, James has told you how to get past this on boot up with cntrl |. To trouble shoot the device first verify the mac address with linkloop and arp. Once the mac is verified ping the card to see if its active. Then ping the router. Then ping another server.
Linkloop will verify the 2nd layer
Ping will verify the 3rd layer.
If linkloop fails then check the 1st layer or physical connection.
# lanscan
Hardware Station Crd Hdw Net-Interface NM MAC HP-DLPI DLPI
Path Address In# State NamePPA ID Type Support Mjr#
1/0/9/1/0/6/0 0x001560DEE990 11 UP lan11 snap11 1 ETHER Yes
119
# linkloop -v 0x001560DEE990
Link connectivity to LAN station: 0x001560DEE990
-- OK
# ifconfig lan11
lan11: flags=1843
# ping 157.235.1.89
# netstat -rn
Routing tables
Destination Gateway Flags Refs Interface Pmtu
default 157.235.1.246 UG 0 lan11 0
# ping 157.235.1.246
Support Fatherhood - Stop Family Law