Can a C160 workstation run UX 11.0 64-bit?

[Randy Hagedorn]

Does anyone know if a HP C160 workstation can run UX 11.0 64-bit? If so, is there a specific 'model' level that it needs to be at? We would like to use this as an Oracle 8.1.7.0.0 64-bit test system.

Thanks in advance.

[James R. Ferguson · Accepted solution]

Hi:

Yes, the 9000/780/C160 will support either 32- or 64-bit kernels. See /etc/.supported_bits.

Regards!

...JRF...

[Edward Alfert_2]

YES!

I have a C240 and one of the technical docs i have printed mentions C160 and above as supporting 64bit.

[Edward Alfert_2]

This is even better than the doc i have printed.

Very Nice Graph!
http://www.hp.com/cgi-bin/printerfriendly.cgi?in=/workstations/products/unix/operating/support_matrix/update.html

[linuxfan]

Hi,


Yes C160 will support both the 32bit and 64 bit

http://docs.hp.com/cgi-bin/fsearch/framedisplay?top=/hpux/onlinedocs/B3782-90807/B3782-90807_top.html&con=/hpux/onlinedocs/B3782-90807/00/00/10-con.html&toc=/hpux/onlinedocs/B3782-90807/00/00/10-toc.html&searchterms=C160&queryid=20010927-114347

-Regards
Ramesh

[Sanjay_6]

Hi,

Yes C160 Supports both 32 bit and 64 Bit of 11.0

http://docs.hp.com/cgi-bin/fsearch/framedisplay?top=/hpux/onlinedocs/5971-0642/5971-0642_top.html&con=/hpux/onlinedocs/5971-0642/00/00/6-con.html&toc=/hpux/onlinedocs/5971-0642/00/00/6-toc.html&searchterms=supported%20&queryid=20010927-114745

Hope this helps.

thanks

[A. Clay Stephenson]

The C160 will support 32 or 64 bit but the C160L will only run 32-bit. Also, if you have any EISA cards in your box, you must remove them to run 64-bit.

Clay