Disk Serial Number

[Kathryn Paczowski]

Is there a command to find the serial number of the disk drives on an HP 11.00 Server?

[James A. Donovan]

Run the "Information Tool" on the disk drive from within the stm utility.

[Karthik_2 · Accepted solution]

kathryn,
You can use stm to get this info.
#cstm
#map--Give a list of all devices.
# Sel dev --substitute the device number corresponfing to the hardware path
#infolog --This will print the information available about that disk .
It will look something like this ..
Product Id: ST318203LC Vendor: SEAGATE
Device Type: SCSI Disk Firmware Rev: HP01
Device Qualifier: SEAGATEST318203LC Logical Unit: 0
Serial Number: LR18660700001002KBPS

[Bill McNAMARA_1]

use the command diskinfo on the raw device file

Note we dont all have Online Diag installed
... but should
free from software.hp.com

Later
Bill

[James A. Donovan]

Bill,

diskinfo will give the Product ID, but not the serial number of the drive.

[Bill McNAMARA_1]

yes Jim you're correct sorry 'bout that.
even diskinfo -v? I don't have a system
here to check on..

Should add though that serial numbers on disk
arrays are a little more difficult to get.
For a clariion it's best done with mstm diagnostics
and for autoraid/fc60 too.

Later,
Bill

[Satish Y]

Hi,

No Bill, -v option too doesn't give you serial number.

I think stm is the only way (cstm)...

Cheers...
Satish.