HPE Community
Operating System - HP-UX
1833313 Members
2791 Online
110051 Solutions
New Discussion

Document guide to upgrade from PA RISC v1 to PA RISC v2

 
sharathkv25
Frequent Advisor

‎09-24-2008 08:19 PM

‎09-24-2008 08:19 PM

Document guide to upgrade from PA RISC v1 to PA RISC v2

Hi,

Is there a document guide for upgrading from PA RISC v1 to PA RISC v2?

Thanks
0 Kudos
Reply
2 REPLIES 2
Dennis Handly
Acclaimed Contributor

‎09-24-2008 08:27 PM

‎09-24-2008 08:27 PM

Re: Document guide to upgrade from PA RISC v1 to PA RISC v2

Since everything is forward compatible, there really isn't anything to do.

If you want to take advantage of the new features or find out which servers are supported for 11.23, you can look at the Release Notes: (2004 version)
http://docs.hp.com/en/5992-2852/index.html
0 Kudos
Reply
Torsten.
Acclaimed Contributor

‎09-24-2008 09:02 PM

‎09-24-2008 09:02 PM

Re: Document guide to upgrade from PA RISC v1 to PA RISC v2

"PA RISC v1 to PA RISC v2" ???

Do you mean hp-ux 11iv1 to hp-ux 11iv2?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.