EMS and VP/O

[Jesus M. Charro Dorado]

I am trying to send hardware failure alarms from EMS to VP/O through the VP/O agent, but when I run monconfig and add the monitoring request, I have no "opcmsg" option.

EMS version is A.03.00.01, and VP/O Agent is A.06.08.

Any idea?

Thanks a lot.

Jesus.

[Steven Gillard_2]

You might want to try upgrading EMS and STM to their latest versions, the one you have is a little old.

I have A.03.20 and monconfig gives me the OPC option fine:

Notification Method:
1) UDP 2) TCP 3) SNMP 4) TEXTLOG
5) SYSLOG 6) EMAIL 7) CONSOLE 8) OPC <<---

See http://docs.hp.com/hpux/onlinedocs/diag/stm/stm_upd.htm for information about upgrading.

Regards,
Steve

[Jesus M. Charro Dorado]

I would prefer not to upgrade. According to the manuals, version 3.00 supports opcmsg.

Thanks for your help anyway.

Regards,

Jesus.