Error trying to start DCE on HP-UX 11.11

[KPS]

I have a PA-RISC server running HP-UX 11.11 that has been imaged with an Ignite Golden image. We seem to be having issues with DCE starting up on this system.

See Below:

#/sbin/init.d/dce start
Beginning DCE startup...
NOTE: No components of DCE are configured.

Finished DCE startup.

I checked /opt/dce/sbin/dce for dce related binaries and they are in this directory.
Has anyone run into this or have any ideas to resolve this?

Thanks in advance....

KPS

[Coolmar · Accepted solution]

Hi,

Did you run "dce_config"?

http://docs.hp.com/en/B3190-90076/ch06s03.html#d0e3267

Starting dce_config


Log in as root on the system you want to configure.

Run dce_config.

The DCE Main Menu is displayed.


DCE Main Menu (on hostname)1. CONFIGURE -configure and start DCE daemons2. START -re-start DCE daemons3. STOP -stop DCE daemons4. UNCONFIGURE -remove a host from CDS and SEC data-bases5. REMOVE -stop DCE daemons and remove data files created by DCE daemons99.EXITselection:

[KPS]

dce_config did the trick.


I stopped/started it and it started up with no errors or failures.

Very strange, as I checked my /etc/rc.log and it didn't have anything saying it failed when the system booted last. I appreciate your help and I should be all set.

Thanks,

KPS