Operating System - HP-UX
1834796 Members
3333 Online
110070 Solutions
New Discussion

FTP - using sunique w/ NT

 
Duke Nguyen
Occasional Advisor

FTP - using sunique w/ NT

FTPing files from Unix platform to NT platform with sunique option returns the following error:

500 'STOU filename.dat': Invalid number of parameters

Does anyone know if you can use the sunique switch with NT? IF so, what needs to be done on the NT side? sunique works fine between unix platfroms.

Thanks,
Duke
1 REPLY 1
Craig Rants
Honored Contributor

Re: FTP - using sunique w/ NT

Here are all the options with NT ftp.

Suppresses auto-login upon initial connection.
-i Turns off interactive prompting during multiple file
transfers.
-d Enables debugging.
-g Disables filename globbing (see GLOB command).
-s:filename Specifies a text file containing FTP commands; the
commands will automatically run after FTP starts.
-a Use any local interface when binding data connection.
-A login as anonymous.
-w:buffersize Overrides the default transfer buffer size of 4096.
host Specifies the host name or IP address of the remote
host to connect to.

Notes:
- mget and mput commands take y/n/q for yes/no/quit.
- Use Control-C to abort commands.

They probably don't support that type of flag unless you buy some special ftp server software.

GL,
C
"In theory, there is no difference between theory and practice. But, in practice, there is. " Jan L.A. van de Snepscheut