Having ignite issues when trying to restore a server from tape

[Joe Profaizer]

I have an Itanium hp-ux system that I ran a make tape recovery on. I'm attempting to restore such tape to another itanium. I did an interactive restore also, but seem to have the same result once the system reboots again. Below is the output. It halts at the same exact place every time. Any assistance would be appreciated. This is an HP-UX 11.31 image and I'm booting from the DVD and restoring via the tape device..

Below is the command I used from stlPora4 and I'm trying to use this tape to create stlPora4. Same type of hardware, but no luck whatsoever:
/opt/ignite/bin/make_tape_recovery -Iv -a /dev/rmt/3mn -x inc_entire=vg00

EFI Boot Manager ver 1.10 [14.61] Firmware ver 1.13 [4402]

Please select a boot option

HP-UX Primary Boot: 0/1/1/0.0x1.0x0
HP-UX HA Alternate Boot: 0/1/1/0.0.0
EFI Shell [Built-in]
Internal Bootable DVD
Boot Option Maintenance Menu
System Configuration Menu


Use ^ and v to change option(s). Use Enter to select an option
Loading.: HP-UX Primary Boot: 0/1/1/0.0x1.0x0
Starting: HP-UX Primary Boot: 0/1/1/0.0x1.0x0

(C) Copyright 1999-2006 Hewlett-Packard Development Company, L.P.
All rights reserved

HP-UX Boot Loader for IPF -- Revision 2.035

Press Any Key to interrupt Autoboot
\EFI\HPUX\AUTO ==> boot vmunix
Seconds left till autoboot - 0
AUTOBOOTING...> System Memory = 32752 MB
loading section 0
................................................................................
.. (complete)
loading section 1
............. (complete)
loading symbol table
loading System Directory (boot.sys) to MFS
.....
loading MFSFILES directory (bootfs) to MFS
.....................
Launching /stand/vmunix
SIZE: Text:41544K + Data:6397K + BSS:21890K = Total:69832K

Console is on Serial Device
Booting kernel...

HP-UX will call firmware in physical-addressing mode
Loaded ACPI revision 2.0 tables.
Using /stand/ext_ioconfig

Memory Class Setup
-------------------------------------------------------------------------
Class Physmem Lockmem Swapmem
-------------------------------------------------------------------------
System : 31154 MB 31154 MB 31154 MB
Kernel : 31154 MB 31154 MB 31154 MB
User : 29896 MB 26503 MB 26607 MB
-------------------------------------------------------------------------

Starting ktracer 0 1
Installing Socket Protocol families AF_INET and AF_INET6
Kernel EVM initialized
sec_init(): kernel RPC authentication/security initialization.
secgss_init(): kernel RPCSEC_GSS security initialization.
rpc_init(): kernel RPC initialization.
rpcmod_install(): kernel RPC STREAMS module "rpcmod" installation. ...(driver_in
stall)
NOTICE: nfs_client_pv3_install(): nfs3 File system was registered at index 11.
NOTICE: nfs_client_pv4_install(): nfs4 File system was registered at index 12.
NOTICE: cachefsc_install: cachefs File system was registered at index 14.
td: claimed Tachyon XL2 Fibre Channel Mass Storage card at 0/2/1/0
td: claimed Tachyon XL2 Fibre Channel Mass Storage card at 0/5/1/0
Boot device's HP-UX HW path is: 0.1.1.0.1.0

System Console is on the Built-In Serial Interface
igelan0: INITIALIZING HP A6825-60101 PCI 1000Base-T Adapter at hardware path 0/1
/2/0
igelan1: INITIALIZING HP A6847-60101 PCI 1000Base-SX Adapter at hardware path 0/
3/2/0
AF_INET socket/streams output daemon running, pid 41
afinet_prelink: module installed
Starting the STREAMS daemons-phase 1
LVM: Root VG activated
Swap device table: (start & size given in 512-byte blocks)
entry 0 - major is 64, minor is 0x2; start = 0, size = 16777216
The device file /dev/rroot does not exist or is not correct.
Automatic checks of the root file system not performed.
Create STCP device files
Starting the STREAMS daemons-phase 2
$Revision: vmunix: B.11.31_LR FLAVOR=perf
Memory Information:
physical page size = 4096 bytes, logical page size = 4096 bytes
Physical: 33538604 Kbytes, lockable: 25205756 Kbytes, available: 28681736 Kb
ytes

insf: Installing special files for sdisk instance 2 address 0/0/3/0.0.0.0
insf: Installing special files for sdisk instance 1 address 0/1/1/0.0.0
insf: Installing special files for sdisk instance 0 address 0/1/1/0.1.0
insf: Installing special files for esdisk instance 4 address 64000/0xfa00/0x2
insf: Installing special files for esdisk instance 3 address 64000/0xfa00/0x3
insf: Installing special files for esdisk instance 5 address 64000/0xfa00/0x4

[Joe Profaizer]

I just wanted to mention, the above output is after the system reboots itself.

[Joe Profaizer]

Below is the output from when I "RS" the system and tried to reboot it on it's own:
Loading.: HP-UX Primary Boot: 0/1/1/0.0x1.0x0
Starting: HP-UX Primary Boot: 0/1/1/0.0x1.0x0

(C) Copyright 1999-2006 Hewlett-Packard Development Company, L.P.
All rights reserved

HP-UX Boot Loader for IPF -- Revision 2.035

Press Any Key to interrupt Autoboot
\EFI\HPUX\AUTO ==> boot vmunix
Seconds left till autoboot - 0
AUTOBOOTING...> System Memory = 32752 MB
loading section 0
.................................................................................. (complete)
loading section 1
............. (complete)
loading symbol table
loading System Directory (boot.sys) to MFS
.....
loading MFSFILES directory (bootfs) to MFS
.....................
Launching /stand/vmunix
SIZE: Text:41544K + Data:6397K + BSS:21890K = Total:69832K

Console is on Serial Device
Booting kernel...

HP-UX will call firmware in physical-addressing mode
Loaded ACPI revision 2.0 tables.
Using /stand/ext_ioconfig

Memory Class Setup
-------------------------------------------------------------------------
Class Physmem Lockmem Swapmem
-------------------------------------------------------------------------
System : 31154 MB 31154 MB 31154 MB
Kernel : 31154 MB 31154 MB 31154 MB
User : 29896 MB 26503 MB 26607 MB
-------------------------------------------------------------------------

Starting ktracer 0 1
Installing Socket Protocol families AF_INET and AF_INET6
Kernel EVM initialized
sec_init(): kernel RPC authentication/security initialization.
secgss_init(): kernel RPCSEC_GSS security initialization.
rpc_init(): kernel RPC initialization.
rpcmod_install(): kernel RPC STREAMS module "rpcmod" installation. ...(driver_install)
NOTICE: nfs_client_pv3_install(): nfs3 File system was registered at index 11.
NOTICE: nfs_client_pv4_install(): nfs4 File system was registered at index 12.
NOTICE: cachefsc_install: cachefs File system was registered at index 14.
td: claimed Tachyon XL2 Fibre Channel Mass Storage card at 0/2/1/0
td: claimed Tachyon XL2 Fibre Channel Mass Storage card at 0/5/1/0
Boot device's HP-UX HW path is: 0.1.1.0.1.0

System Console is on the Built-In Serial Interface
igelan0: INITIALIZING HP A6825-60101 PCI 1000Base-T Adapter at hardware path 0/1/2/0
igelan1: INITIALIZING HP A6847-60101 PCI 1000Base-SX Adapter at hardware path 0/3/2/0
AF_INET socket/streams output daemon running, pid 41
afinet_prelink: module installed
Starting the STREAMS daemons-phase 1
LVM: Root VG activated
Swap device table: (start & size given in 512-byte blocks)
entry 0 - major is 64, minor is 0x2; start = 0, size = 16777216
The device file /dev/rroot does not exist or is not correct.
Automatic checks of the root file system not performed.

Stored message buffer up to system crash:

MFS is defined: base= 0xe000000101ba3000 size= 26788 KB
Loaded ACPI revision 2.0 tables.
MMIO on this platform supports Write Coalescing.


MCA recovery subsystem disabled, not supported on this platform.
Using /stand/ext_ioconfig

Memory Class Setup
-------------------------------------------------------------------------
Class Physmem Lockmem Swapmem
-------------------------------------------------------------------------
System : 31154 MB 31154 MB 31154 MB
Kernel : 31154 MB 31154 MB 31154 MB
User : 29896 MB 26503 MB 26607 MB
-------------------------------------------------------------------------

Starting ktracer 0 1
Installing Socket Protocol families AF_INET and AF_INET6
64000/0xfa00 esvroot
Kernel EVM initialized
sec_init(): kernel RPC authentication/security initialization.
secgss_init(): kernel RPCSEC_GSS security initialization.
rpc_init(): kernel RPC initialization.
rpcmod_install(): kernel RPC STREAMS module "rpcmod" installation. ...(driver_install)
NOTICE: nfs_client_pv3_install(): nfs3 File system was registered at index 11.
NOTICE: nfs_client_pv4_install(): nfs4 File system was registered at index 12.
NOTICE: cachefsc_install: cachefs File system was registered at index 14.
btlan_load() Loaded Successfully
0 sba
0/0 lba
0/0/1/0 asio0
0/0/1/1 asio0
0/0/2/0 UsbOhci
0/0/2/1 UsbOhci
0/0/2/2 UsbEhci
0/0/3/0 side_multi
0/0/3/0.0 side
0/0/3/0.1 side
0/0/3/0.0.0x0 estp
0/0/4/0 gvid_core
0/1 lba
0/1/1 pci_slot
c8xx BUS: 2 SCSI C1010 Ultra Wide Single-Ended A6829-60101 assigned CPU: 0
0/1/1/0 c8xx
c8xx BUS: 3 SCSI C1010 Ultra160 Wide LVD A6829-60101 assigned CPU: 3
0/1/1/1 c8xx
0/1/2 pci_slot
0/1/2/0 igelan
0/2 lba
0/2/1 pci_slot
0/1/1/0.0x6 estp
0/1/1/0.0x4 estp
0/1/1/0.0x6.0x0 eslpt
0/1/1/0.0x1 estp
0/1/1/0.0x4.0x0 eslpt
0/1/1/0.0x0 estp
0/1/1/0.6 tgt
0/1/1/0.6.0 stape
0/1/1/0.4 tgt
0/1/1/0.4.0 sctl
0/1/1/0.0x1.0x0 eslpt
0/1/1/0.0x0.0x0 eslpt
0/1/1/0.1 tgt
0/1/1/0.1.0 sdisk
0/1/1/0.0 tgt
0/1/1/0.0.0 sdisk
0/0/3/0.0.0x0.0x0 eslpt
0/0/3/0.0.0 tgt
0/0/3/0.0.0.0 sdisk
td: claimed Tachyon XL2 Fibre Channel Mass Storage card at 0/2/1/0
0/2/1/0 td
0/3 lba
0/3/1 pci_slot
0/3/2 pci_slot
0/3/2/0 igelan
0/4 lba
0/4/1 pci_slot
0/4/2 pci_slot
0/5 lba
0/5/1 pci_slot
td: claimed Tachyon XL2 Fibre Channel Mass Storage card at 0/5/1/0
0/5/1/0 td
120 processor
121 processor
122 processor
123 processor
250 pdh
250/0 ipmi
250/1 acpi_node
64000/0xfa00/0x0 estape
64000/0xfa00/0x1 esctl
64000/0xfa00/0x2 esdisk
64000/0xfa00/0x3 esdisk
64000/0xfa00/0x4 esdisk
Boot device's HP-UX HW path is: 0.1.1.0.1.0

System Console is on the Built-In Serial Interface
igelan0: INITIALIZING HP A6825-60101 PCI 1000Base-T Adapter at hardware path 0/1/2/0
igelan1: INITIALIZING HP A6847-60101 PCI 1000Base-SX Adapter at hardware path 0/3/2/0
AF_INET socket/streams output daemon running, pid 41
afinet_prelink: module installed
Starting the STREAMS daemons-phase 1
LVM: Root VG activated
Swap device table: (start & size given in 512-byte blocks)
entry 0 - major is 64, minor is 0x2; start = 0, size = 16777216
Dump device table: (start & size given in 1-Kbyte blocks)
entry 0000000000000000 - major is 3, minor is 0x2; start = 2349920, size = 8388608
VFS_MOUNTROOT error information:
0:(hfs) 22
1:(nfs) 223
6:(DevFS) 251
10:(vxfs) 28
11:(nfs3) 223
12:(nfs4) 223
13:(autofs) 251
16:(cifs) 223
18:(dnlc_neg_fs) 251

Message buffer contents after system crash:

panic: VFS_MOUNTROOT: RDWR: all VFS_MOUNTROOTs failed: NEED DRIVERS ?????
Stack Trace:
IP Function Name
0xe00000000205f2e0 vfs_mountroot+0x6c0
0xe0000000017bbdf0 im_preinitrc+0x450
0xe000000002050f40 DoCalllist+0x390
End of Stack Trace

linkstamp: Mon Feb 02 15:40:33 CST 2009
_release_version: @(#) $Revision: vmunix: B.11.31_LR FLAVOR=perf
Calling function e0000000018a8100 for Shutdown State 1 type 0x2
i 0 pfn 0x1 pages 0x9f
i 1 pfn 0x100 pages 0x3f096
i 2 pfn 0x3f680 pages 0xc
i 3 pfn 0x100000 pages 0x6ffffe
i 4 pfn 0x4040000 pages 0xbfe14
i 5 pfn 0x40ffe80 pages 0x138
*** Not enough CPUS for a compressed dump ***

*** A system crash has occurred. (See the above messages for details.)
*** The system is now preparing to dump physical memory to disk, for use
*** in debugging the crash.

*** The dump will be a SELECTIVE dump with
compression OFF and concurrency ON: 2662 of 32753 megabytes.
*** To change this dump type, press any key within 10 seconds.

[Patrick Wallek]

What model server was the Ignite tape created on?

What model server are you restoring it to?

It is possible that there is too much different between the 2 servers for this to work.

[Joe Profaizer]

They are both rx4640s.

[Steven E. Protter]

Shalom,

rx4640 to rx4640 should work.

Either there is a problem with the image or there is a hardware difference that is confusing the restore. Maybe an add in NIC card.

SEP

[Joe Profaizer]

I'll look for a differences. Memory amounts and CPUs should not matter, correct? I think the source system has 8 CPUs and 64GB RAM and the target server has 4 CPUs and 32GB RAM.
Could it be hanging on the external DAT when booting. Such DAT drive is what I use for the recovery.

[Joe Profaizer]

The source system's internal system disk is 146GB and the target system's disk is 73GB. Would that be a big factor?
The source vgdisplay only shows it using about 58GB total.
# vgdisplay -v vg00
--- Volume groups ---
VG Name /dev/vg00
VG Write Access read/write
VG Status available
Max LV 255
Cur LV 9
Open LV 9
Max PV 16
Cur PV 1
Act PV 1
Max PE per PV 4356
VGDA 2
PE Size (Mbytes) 32
Total PE 4347
Alloc PE 1791
Free PE 2556
Total PVG 0
Total Spare PVs 0
Total Spare PVs in use 0
VG Version 1.0
VG Max Size 2178g
VG Max Extents 69696

--- Logical volumes ---
LV Name /dev/vg00/lvol1
LV Status available/syncd
LV Size (Mbytes) 1792
Current LE 56
Allocated PE 56
Used PV 1

LV Name /dev/vg00/lvol2
LV Status available/syncd
LV Size (Mbytes) 8192
Current LE 256
Allocated PE 256
Used PV 1

LV Name /dev/vg00/lvol3
LV Status available/syncd
LV Size (Mbytes) 1024
Current LE 32
Allocated PE 32
Used PV 1

LV Name /dev/vg00/lvol4
LV Status available/syncd
LV Size (Mbytes) 512
Current LE 16
Allocated PE 16
Used PV 1

LV Name /dev/vg00/lvol5
LV Status available/syncd
LV Size (Mbytes) 128
Current LE 4
Allocated PE 4
Used PV 1

LV Name /dev/vg00/lvol6
LV Status available/syncd
LV Size (Mbytes) 7040
Current LE 220
Allocated PE 220
Used PV 1

LV Name /dev/vg00/lvol7
LV Status available/syncd
LV Size (Mbytes) 4320
Current LE 135
Allocated PE 135
Used PV 1

LV Name /dev/vg00/lvol8
LV Status available/syncd
LV Size (Mbytes) 8704
Current LE 272
Allocated PE 272
Used PV 1

LV Name /dev/vg00/lvol9
LV Status available/syncd
LV Size (Mbytes) 25600
Current LE 800
Allocated PE 800
Used PV 1


--- Physical volumes ---
PV Name /dev/disk/disk4_p2
PV Status available
Total PE 4347
Free PE 2556
Autoswitch On
Proactive Polling On

I'm really stumped here.......

[sujit kumar singh]

Hi

If you are not able to boot from a Tape media you can upgade the system firmware to the rx4640.

Other part is that can you boot the system in the LVM maintenance mode what does this show in LVM Maintenance mode boot.

Does this Still show that /dev/rroot not valid or not found?

Can you check from the MP of the both the Source as well as the Target rx4640 the system FW Level

from MP
MP>CM
MP:CM>SYSREV

If nit matchibng please upgrade the FW.


Please try rebooting in LVM Maint Mode and tell what happens

Regards
Sujit

[Joe Profaizer]

The firmware is indeed older on the target system. How do I go about upgrading the FW?

Source system:
[stldora4rmt] MP:CM> sysrev


SYSREV

Current firmware revisions

MP FW : E.03.32
BMC FW : 04.06
EFI FW : 05.48
System FW : 04.29
MX2 FW : CPU Module: | 0 | 1 | 2 | 3 |
: PIC FW: | 01.73 | 01.73 | N/A | N/A |
: DSP FW: | 01.23 | 01.23 | N/A | N/A |



Target system:
[stlpora4rmt] MP:CM> sysrev


SYSREV

Current firmware revisions

MP FW : E.02.26
BMC FW : 02.20
EFI FW : 01.10
System FW : 01.13


I also upgraded the ignite version on my source system, but now I have a mismatch from the install DVD and Ignite version:

ERROR: The version of Ignite-UX on your tape (C.7.7.98) is
different than the

version of Ignite-UX on the media that the client booted
(C.7.5.142).

The versions must match in order to ensure correct behavior.

Continuing th
e installation with a tape version mismatch is likely
to cause
indeterminate prob
lems. Do you want to continue anyway? (y/[n]):

Should I upgrade the firmware, revert back to a matching Ignite version, then retry?

[sujit kumar singh]

Hi Joe,



1) First of all i would like to boot the system in the LVM Maint Mode and see if something can be done:


2) for downloading the FW

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=346361&prodTypeId=15351&prodSeriesId=88837&swLang=13&taskId=135&swEnvOID=54

the Zip file you can download and extract that zip to get an iso image and write that iso image into a CD Media(you can use nero).
This is a bootable CD and you can boot the rx4640 from this.

for the installation installation Instructions:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=88837&swItem=ux-58871-1&prodNameId=346361&swEnvOID=54&swLang=13&taskId=135&mode=4&idx=0

3) What i shall right now suggest is that upgrade the FW of the rx4640 system and temporarily downgrade the Ignite version on the source and then try.

regards
sujit

[Joe Profaizer]

Thanks. I have March 2008 DVD in the system. Can I simply start a fresh HP-UX install and will that upgrade my FW? It was the same distribution that I created my source system with.

After the install, I can revert the ignite version and try to restore once again.

[sujit kumar singh]

Hi

You can do that, just felt a bit eager to know what happens if the system is booted in the Single user mode.

you can go ahead and install 11.23 Sep 2008 Release that is OK.


Just after uinstallation check if these 2 patches get installed.
s700_800 11.23 rx4640 System, BMC and MP Firmware Patch PHSS_37894

s700_800 11.23 iLO MP Firmware for hp Integrity Servers PHSS_33094

The other thing i shall ask you as suggested before to try with an upgraded FW and lowered Igbite version to match the versoin on the DVD.

OR Perhaps after the FW upgrade you can try directly booting from the Ignite Tape.


Regards
sujit

[Joe Profaizer]

How do I upgrade the firmware with the install dvds (March 2008 11.31)? I loaded the OS from the installation CDs thinking that the firmware for the rx4640 would upgrade also? I thought I could bypass the downloads and make a DVD.

Please advise.

[sujit kumar singh]

hi Joe,

for 11.31 you can download and install the following patch from the itrc.

11.31 rx4640 System, BMC and MP Firmware Patch

PHSS_37895

Download that and you can see that this will update the system firmware once you install that using swinstall.


Regards
Sujit

[Joe Profaizer]

OK. I have updated the firmware, but have the same result upon boot. I then tried to reboot while having the tape drive disconnected and the system crashed.

Scsi(Pun1,Lun0) HP 73.4GST373453LC HPC4 (160 MBytes/sec)
Loading.: HP-UX Primary Boot: 0/1/1/0.0x1.0x0
Starting: HP-UX Primary Boot: 0/1/1/0.0x1.0x0

(C) Copyright 1999-2006 Hewlett-Packard Development Company, L.P.
All rights reserved

HP-UX Boot Loader for IPF -- Revision 2.035

Press Any Key to interrupt Autoboot
\EFI\HPUX\AUTO ==> boot vmunix
Seconds left till autoboot - 0
AUTOBOOTING...> System Memory = 32739 MB
loading section 0
.................................................................................. (complete)
loading section 1
............. (complete)
loading symbol table
loading System Directory (boot.sys) to MFS
.....
loading MFSFILES directory (bootfs) to MFS
.....................
Launching /stand/vmunix
SIZE: Text:41544K + Data:6397K + BSS:21890K = Total:69832K
Console is on Serial Device - via PCDP
Booting kernel...

Loaded ACPI revision 2.0 tables.
Using /stand/ext_ioconfig

Memory Class Setup
-------------------------------------------------------------------------
Class Physmem Lockmem Swapmem
-------------------------------------------------------------------------
System : 31139 MB 31139 MB 31139 MB
Kernel : 31139 MB 31139 MB 31139 MB
User : 29880 MB 26490 MB 26593 MB
-------------------------------------------------------------------------

Starting ktracer 0 1
Installing Socket Protocol families AF_INET and AF_INET6
Kernel EVM initialized
sec_init(): kernel RPC authentication/security initialization.
secgss_init(): kernel RPCSEC_GSS security initialization.
rpc_init(): kernel RPC initialization.
rpcmod_install(): kernel RPC STREAMS module "rpcmod" installation. ...(driver_install)
NOTICE: nfs_client_pv3_install(): nfs3 File system was registered at index 11.
NOTICE: nfs_client_pv4_install(): nfs4 File system was registered at index 12.
NOTICE: cachefsc_install: cachefs File system was registered at index 14.
td: claimed Tachyon XL2 Fibre Channel Mass Storage card at 0/2/1/0
td: claimed Tachyon XL2 Fibre Channel Mass Storage card at 0/5/1/0
Boot device's HP-UX HW path is: 0.1.1.0.1.0

System Console is on the Built-In Serial Interface
igelan0: INITIALIZING HP A6825-60101 PCI 1000Base-T Adapter at hardware path 0/1/2/0
AF_INET socket/streams output daemon running, pid 41
afinet_prelink: module installed
Starting the STREAMS daemons-phase 1
LVM: Root VG activated
Swap device table: (start & size given in 512-byte blocks)
entry 0 - major is 64, minor is 0x2; start = 0, size = 16777216
The device file /dev/rroot does not exist or is not correct.
Automatic checks of the root file system not performed.

Stored message buffer up to system crash:

MFS is defined: base= 0xe000000101ba3000 size= 26788 KB
Loaded ACPI revision 2.0 tables.
MMIO on this platform supports Write Coalescing.


MCA recovery subsystem disabled, not supported on this platform.
Using /stand/ext_ioconfig

Memory Class Setup
-------------------------------------------------------------------------
Class Physmem Lockmem Swapmem
-------------------------------------------------------------------------
System : 31139 MB 31139 MB 31139 MB
Kernel : 31139 MB 31139 MB 31139 MB
User : 29880 MB 26490 MB 26593 MB
-------------------------------------------------------------------------

Starting ktracer 0 1
Installing Socket Protocol families AF_INET and AF_INET6
64000/0xfa00 esvroot
Kernel EVM initialized
sec_init(): kernel RPC authentication/security initialization.
secgss_init(): kernel RPCSEC_GSS security initialization.
rpc_init(): kernel RPC initialization.
rpcmod_install(): kernel RPC STREAMS module "rpcmod" installation. ...(driver_install)
NOTICE: nfs_client_pv3_install(): nfs3 File system was registered at index 11.
NOTICE: nfs_client_pv4_install(): nfs4 File system was registered at index 12.
NOTICE: cachefsc_install: cachefs File system was registered at index 14.
btlan_load() Loaded Successfully
0 sba
0/0 lba
0/0/1/0 asio0
0/0/1/1 asio0
0/0/2/0 UsbOhci
0/0/2/1 UsbOhci
0/0/2/2 UsbEhci
0/0/3/0 side_multi
0/0/3/0.0 side
0/0/3/0.1 side
0/0/3/0.0.0x0 estp
0/0/4/0 gvid_core
0/1 lba
0/1/1 pci_slot
c8xx BUS: 2 SCSI C1010 Ultra160 Wide LVD A6829-60101 assigned CPU: 0
0/1/1/0 c8xx
c8xx BUS: 3 SCSI C1010 Ultra160 Wide LVD A6829-60101 assigned CPU: 3
0/1/1/1 c8xx
0/1/2 pci_slot
0/1/2/0 igelan
0/2 lba
0/2/1 pci_slot
0/1/1/0.0x4 estp
0/1/1/0.0x4.0x0 eslpt
0/1/1/0.0x1 estp
0/1/1/0.0x0 estp
0/1/1/0.4 tgt
0/1/1/0.4.0 sctl
0/1/1/0.0x1.0x0 eslpt
0/1/1/0.1 tgt
0/1/1/0.1.0 sdisk
0/1/1/0.0x0.0x0 eslpt
0/1/1/0.0 tgt
0/1/1/0.0.0 sdisk
0/0/3/0.0.0x0.0x0 eslpt
0/0/3/0.0.0 tgt
0/0/3/0.0.0.0 sdisk
td: claimed Tachyon XL2 Fibre Channel Mass Storage card at 0/2/1/0
0/2/1/0 td
0/3 lba
0/3/1 pci_slot
0/3/2 pci_slot
0/4 lba
0/4/1 pci_slot
0/4/2 pci_slot
0/5 lba
0/5/1 pci_slot
td: claimed Tachyon XL2 Fibre Channel Mass Storage card at 0/5/1/0
0/5/1/0 td
120 processor
121 processor
122 processor
123 processor
250 pdh
250/0 ipmi
250/1 acpi_node
64000/0xfa00/0x1 esctl
64000/0xfa00/0x2 esdisk
64000/0xfa00/0x3 esdisk
64000/0xfa00/0x4 esdisk
Boot device's HP-UX HW path is: 0.1.1.0.1.0

System Console is on the Built-In Serial Interface
igelan0: INITIALIZING HP A6825-60101 PCI 1000Base-T Adapter at hardware path 0/1/2/0
AF_INET socket/streams output daemon running, pid 41
afinet_prelink: module installed
Starting the STREAMS daemons-phase 1
LVM: Root VG activated
Swap device table: (start & size given in 512-byte blocks)
entry 0 - major is 64, minor is 0x2; start = 0, size = 16777216
Dump device table: (start & size given in 1-Kbyte blocks)
entry 0000000000000000 - major is 3, minor is 0x2; start = 2349920, size = 8388608
VFS_MOUNTROOT error information:
0:(hfs) 22
1:(nfs) 223
6:(DevFS) 251
10:(vxfs) 28
11:(nfs3) 223
12:(nfs4) 223
13:(autofs) 251
15:(cifs) 223
18:(dnlc_neg_fs) 251

Message buffer contents after system crash:

panic: VFS_MOUNTROOT: RDWR: all VFS_MOUNTROOTs failed: NEED DRIVERS ?????
Stack Trace:
IP Function Name
0xe00000000205f2e0 vfs_mountroot+0x6c0
0xe0000000017bbdf0 im_preinitrc+0x450
0xe000000002050f40 DoCalllist+0x390
End of Stack Trace

linkstamp: Mon Dec 22 09:35:26 CST 2008
_release_version: @(#) $Revision: vmunix: B.11.31_LR FLAVOR=perf
Calling function e0000000018a8100 for Shutdown State 1 type 0x2
i 0 pfn 0x1 pages 0x9f
i 1 pfn 0x100 pages 0x3de24
i 2 pfn 0x3e23c pages 0x2ec
i 3 pfn 0x3fc00 pages 0x220
i 4 pfn 0x100000 pages 0x6ffffe
i 5 pfn 0x4040000 pages 0xbeffe
i 6 pfn 0x40ff000 pages 0xc4a
i 7 pfn 0x40ffc84 pages 0x18e
i 8 pfn 0x40ffe80 pages 0x162
*** Not enough CPUS for a compressed dump ***

*** A system crash has occurred. (See the above messages for details.)
*** The system is now preparing to dump physical memory to disk, for use
*** in debugging the crash.

*** The dump will be a SELECTIVE dump with
compression OFF and concurrency ON: 2658 of 32740 megabytes.
*** To change this dump type, press any key within 10 seconds.

[smatador]

Hi,

Maybe it's a issue with the image.
On the source check the lvlnboot -v

A thread about this sort of panic
http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=271306

[Joe Profaizer]

# lvlnboot -v
Boot Definitions for Volume Group /dev/vg00:
Physical Volumes belonging in Root Volume Group:
/dev/disk/disk4_p2 -- Boot Disk
Boot: lvol1 on: /dev/disk/disk4_p2
Root: lvol3 on: /dev/disk/disk4_p2
Swap: lvol2 on: /dev/disk/disk4_p2
Dump: lvol2 on: /dev/disk/disk4_p2, 0

Current path "/dev/dsk/c11t0d0" is an alternate link, skip.
Current path "/dev/dsk/c11t0d1" is an alternate link, skip.
Current path "/dev/dsk/c15t0d2" is an alternate link, skip.


I will now read the link you sent. I really appreciate your help. I get better response from you then HP Support.

[Joe Profaizer]

So, I'm trying to restore the system again from the ignite tape, made sure I specifed DIFFERENT HARDWARE. Upon the reboot I am going to disconnect the Ignite tape drive to see if the system boots properly. I just have a suspicion it's hanging on this tape drive:

Here's the progress so far:


* Loading configuration utility...
* Beginning installation from source: /dev/rmt/c3t6d0BEST
======= 01/31/09 04:56:44 EST Starting system configuration...
* Configure_Disks: Begin
* Mapping LUN Instance Data
* Will install B.11.31 onto this system.

[Read only - use Ctrl-Ecf for console write access.]

[Read only - use Ctrl-Ecf for console write access.]
* Creating LVM physical volume "/dev/rdisk/disk4_p2" (0/1/1/0.0x1.0x0).
* Creating volume group "vg00".
* Creating logical volume "vg00/lvol1" (/stand).
* Creating logical volume "vg00/lvol2" (swap_dump).
* Creating logical volume "vg00/lvol3" (/).
* Creating logical volume "vg00/lvol4" (/tmp).
* Creating logical volume "vg00/lvol5" (/home).
* Creating logical volume "vg00/lvol6" (/opt).
* Creating logical volume "vg00/lvol7" (/usr).
* Creating logical volume "vg00/lvol8" (/var).
* Creating logical volume "vg00/lvol9" (/orasys).
* Extending logical volume "vg00/lvol1" (/stand).
* Extending logical volume "vg00/lvol2" (swap_dump).
* Extending logical volume "vg00/lvol3" (/).
* Extending logical volume "vg00/lvol4" (/tmp).
* Extending logical volume "vg00/lvol5" (/home).
* Extending logical volume "vg00/lvol6" (/opt).
* Extending logical volume "vg00/lvol7" (/usr).
* Extending logical volume "vg00/lvol8" (/var).
* Extending logical volume "vg00/lvol9" (/orasys).
* Making VxFS filesystem for "/stand", (/dev/vg00/rlvol1).
* Making VxFS filesystem for "/", (/dev/vg00/rlvol3).
* Making VxFS filesystem for "/tmp", (/dev/vg00/rlvol4).
* Making VxFS filesystem for "/home", (/dev/vg00/rlvol5).
* Making VxFS filesystem for "/opt", (/dev/vg00/rlvol6).
* Making VxFS filesystem for "/usr", (/dev/vg00/rlvol7).
* Making VxFS filesystem for "/var", (/dev/vg00/rlvol8).
* Making VxFS filesystem for "/orasys", (/dev/vg00/rlvol9).
* Configure_Disks: Complete
* Download_mini-system: Begin
x ./usr/sbin/idisk, 149648 bytes, 293 tape blocks
x ./sbin/fs/hfs/mkfs, 810544 bytes, 1584 tape blocks
x ./sbin/fs/hfs/newfs, 653132 bytes, 1276 tape blocks
x ./sbin/fs/vxfs/mkfs, 2763040 bytes, 5397 tape blocks
x ./sbin/fs/vxfs/newfs, 685332 bytes, 1339 tape blocks
x ./sbin/fs/vxfs5.0/mkfs, 3909760 bytes, 7637 tape blocks
x ./sbin/fs/vxfs5.0/newfs, 2326040 bytes, 4544 tape blocks
x ./sbin/mkfs symbolic link to ./fs_wrapper
x ./sbin/newfs symbolic link to ./fs_wrapper
x ./sbin/lib/mfsconfig.d/hfs, 984 bytes, 2 tape blocks
x ./sbin/lib/mfsconfig.d/vxfs5.0, 3448 bytes, 7 tape blocks
x ./sbin/fs_wrapper, 673216 bytes, 1315 tape blocks
x ./sbin/sh, 1343360 bytes, 2624 tape blocks
x ./usr/sbin/tunefs, 74716 bytes, 146 tape blocks
x ./sbin/extendfs symbolic link to ./fs_wrapper
x ./sbin/fs/vxfs5.0/extendfs, 3815968 bytes, 7454 tape blocks
x ./sbin/lvchange symbolic link to ./lvm_wrapper
x ./sbin/lvcreate symbolic link to ./lvm_wrapper
x ./sbin/lvdisplay symbolic link to ./lvm_wrapper
x ./sbin/lvextend symbolic link to ./lvm_wrapper
x ./sbin/lvlnboot symbolic link to ./lvm_wrapper
x ./sbin/lvreduce symbolic link to ./lvm_wrapper
x ./sbin/lvremove symbolic link to ./lvm_wrapper
x ./sbin/lvrmboot symbolic link to ./lvm_wrapper
x ./sbin/pvchange symbolic link to ./lvm_wrapper
x ./sbin/pvcreate symbolic link to ./lvm_wrapper
x ./sbin/pvdisplay symbolic link to ./lvm_wrapper
x ./sbin/pvmove symbolic link to ./lvm_wrapper
x ./sbin/vgcfgbackup symbolic link to ./lvm_wrapper
x ./sbin/vgcfgrestore symbolic link to ./lvm_wrapper
x ./sbin/vgchange symbolic link to ./lvm_wrapper
x ./sbin/vgcreate symbolic link to ./lvm_wrapper
x ./sbin/vgdisplay symbolic link to ./lvm_wrapper
x ./sbin/vgexport symbolic link to ./lvm_wrapper
x ./sbin/vgextend symbolic link to ./lvm_wrapper
x ./sbin/vgimport symbolic link to ./lvm_wrapper
x ./sbin/vgreduce symbolic link to ./lvm_wrapper
x ./sbin/vgremove symbolic link to ./lvm_wrapper
x ./sbin/vgscan symbolic link to ./lvm_wrapper
x ./sbin/pvck symbolic link to ./lvm_wrapper
x ./sbin/lvmcmd, 3160272 bytes, 6173 tape blocks
x ./sbin/lvm_wrapper, 1782476 bytes, 3482 tape blocks
x ./usr/lbin/sysadm/create_sysfile, 1602 bytes, 4 tape blocks
x ./usr/lbin/sysadm/check_dlkm_module, 4187 bytes, 9 tape blocks
x ./usr/lbin/sysadm/system_prep, 10000 bytes, 20 tape blocks
x ./usr/lbin/sysrev, 73396 bytes, 144 tape blocks
x ./usr/lbin/fs/vxfs5.0/vxdump, 490928 bytes, 959 tape blocks
x ./usr/lbin/fs/vxfs5.0/vxrestore, 544944 bytes, 1065 tape blocks
x ./usr/lbin/sw/control_utils, 155389 bytes, 304 tape blocks
x ./usr/lbin/swagent, 3321960 bytes, 6489 tape blocks
x ./usr/lbin/krs_file_reader, 19204 bytes, 38 tape blocks
x ./usr/lbin/krs_print, 25012 bytes, 49 tape blocks
x ./usr/lib/uxbootlf, 707584 bytes, 1382 tape blocks
x ./usr/lib/efi/EFI/HPUX/hpux.efi, 654025 bytes, 1278 tape blocks
x ./usr/lib/efi/EFI/HPUX/nbp.efi, 24576 bytes, 48 tape blocks
x ./usr/lib/efi/EFI/Intel_Firmware/fpswa.efi, 328192 bytes, 641 tape blocks
x ./usr/lib/efi/EFI/hp/tools/network/README.network, 1121 bytes, 3 tape blocks
x ./usr/lib/efi/EFI/hp/tools/network/ftp.efi, 449024 bytes, 877 tape blocks
x ./usr/lib/efi/EFI/hp/tools/network/ifconfig.efi, 307712 bytes, 601 tape blocks
x ./usr/lib/efi/EFI/hp/tools/network/inet.nsh, 962 bytes, 2 tape blocks
x ./usr/lib/efi/EFI/hp/tools/network/ping.efi, 302080 bytes, 590 tape blocks
x ./usr/lib/efi/EFI/hp/tools/network/route.efi, 316928 bytes, 619 tape blocks
x ./usr/lib/efi/EFI/hp/tools/network/tcpipv4.efi, 536064 bytes, 1047 tape blocks
x ./usr/lib/efi/startup.nsh, 296 bytes, 1 tape blocks
x ./usr/lib/libc.2, 1503232 bytes, 2936 tape blocks
x ./usr/lib/libdld.1, 12288 bytes, 24 tape blocks
x ./usr/lib/libdld.2, 20480 bytes, 40 tape blocks
x ./usr/lib/libdld.sl symbolic link to ./libdld.2
x ./usr/lib/libelf.2, 102400 bytes, 200 tape blocks
x ./usr/lib/libnss_files.1, 45056 bytes, 88 tape blocks
x ./usr/lib/hpux32/aries32.so, 2358572 bytes, 4607 tape blocks
x ./usr/lib/hpux32/dld.so, 925800 bytes, 1809 tape blocks
x ./usr/lib/hpux32/libCsup.so.1, 385368 bytes, 753 tape blocks
x ./usr/lib/hpux32/libc.so.1, 3653292 bytes, 7136 tape blocks
x ./usr/lib/hpux32/libcl.so symbolic link to ./libcl.so.1
x ./usr/lib/hpux32/libcl.so.1, 67640 bytes, 133 tape blocks
x ./usr/lib/hpux32/libdl.so.1, 76704 bytes, 150 tape blocks
x ./usr/lib/hpux32/libelf.so.1, 252056 bytes, 493 tape blocks
x ./usr/lib/hpux32/libgen.so.1, 73400 bytes, 144 tape blocks
x ./usr/lib/hpux32/libm.so symbolic link to ./libm.so.1
x ./usr/lib/hpux32/libm.so.1, 1544708 bytes, 3018 tape blocks
x ./usr/lib/hpux32/libnss_files.so.1, 145188 bytes, 284 tape blocks
x ./usr/lib/hpux32/libpthread.so.1, 1163296 bytes, 2273 tape blocks
x ./usr/lib/hpux32/libsec.so.1, 380976 bytes, 745 tape blocks
x ./usr/lib/hpux32/libsin.so symbolic link to ./libsin.so.1
x ./usr/lib/hpux32/libsin.so.1, 69684 bytes, 137 tape blocks
x ./usr/lib/hpux32/libstd.so.1, 211668 bytes, 414 tape blocks
x ./usr/lib/hpux32/libstd_v2.so.1, 1759444 bytes, 3437 tape blocks
x ./usr/lib/hpux32/libstream.so.1, 423524 bytes, 828 tape blocks
x ./usr/lib/hpux32/libuca.so.1, 69860 bytes, 137 tape blocks
x ./usr/lib/hpux32/libunwind.so.1, 360672 bytes, 705 tape blocks
x ./usr/lib/hpux32/libvparusr.so.1, 141360 bytes, 277 tape blocks
x ./usr/lib/hpux32/libxcurses.so.1, 951880 bytes, 1860 tape blocks
x ./usr/lib/hpux32/pa_boot32.so, 137980 bytes, 270 tape blocks
x ./usr/lib/hpux32/uld.so, 110700 bytes, 217 tape blocks
x ./usr/lib/hpux32/libJudy.so, 410064 bytes, 801 tape blocks
x ./usr/lib/hpux32/libnsl.so.1, 1096944 bytes, 2143 tape blocks
x ./usr/lib/hpux32/libnss_dns.so.1, 70688 bytes, 139 tape blocks
x ./usr/lib/hpux32/librpcsvc.so.1, 80944 bytes, 159 tape blocks
x ./usr/lib/hpux32/libxti.so.1, 234044 bytes, 458 tape blocks
x ./usr/lib/hpux32/libdcekt.so symbolic link to ./libdcekt.so.1
x ./usr/lib/hpux32/libdcekt.so.1, 10337812 bytes, 20192 tape blocks
x ./usr/lib/hpux32/libgss.so, 233016 bytes, 456 tape blocks
x ./usr/lib/hpux32/libcom_err.so symbolic link to ./libcom_err.so.1
x ./usr/lib/hpux32/libcom_err.so.1, 73384 bytes, 144 tape blocks
x ./usr/lib/hpux32/libk5crypto.so symbolic link to ./libk5crypto.so.1
x ./usr/lib/hpux32/libk5crypto.so.1, 402788 bytes, 787 tape blocks
x ./usr/lib/hpux32/libkrb5.so symbolic link to ./libkrb5.so.1
x ./usr/lib/hpux32/libkrb5.so.1, 1282672 bytes, 2506 tape blocks
x ./usr/lib/hpux32/libevm.so symbolic link to ./libevm.so.1
x ./usr/lib/hpux32/libevm.so.1, 452008 bytes, 883 tape blocks
x ./usr/lib/libc.1, 1523712 bytes, 2976 tape blocks
x ./usr/lib/libcurses.1, 155648 bytes, 304 tape blocks
x ./usr/lib/libpthread.1, 499712 bytes, 976 tape blocks
x ./usr/lib/libsec.2, 159744 bytes, 312 tape blocks
x ./usr/lib/nls/msg/C/cpp.cat, 11271 bytes, 23 tape blocks
x ./usr/lib/nls/msg/C/dcerpc.cat, 13755 bytes, 27 tape blocks
x ./usr/lib/libnsl.1, 479232 bytes, 936 tape blocks
x ./usr/lib/libnsl.sl symbolic link to ./libnsl.1
x ./usr/lib/libxti.2, 106496 bytes, 208 tape blocks
x ./usr/lib/sw/ui/C/smc_addhost.ui, 2571 bytes, 6 tape blocks
x ./usr/lib/sw/ui/C/smc_analyze.ui, 4663 bytes, 10 tape blocks
x ./usr/lib/sw/ui/C/smc_bundles.ui, 1775 bytes, 4 tape blocks
x ./usr/lib/sw/ui/C/smc_chgloc.ui, 3634 bytes, 8 tape blocks
x ./usr/lib/sw/ui/C/smc_defs.h, 24742 bytes, 49 tape blocks
x ./usr/lib/sw/ui/C/smc_depend.ui, 2824 bytes, 6 tape blocks
x ./usr/lib/sw/ui/C/smc_details.ui, 3990 bytes, 8 tape blocks
x ./usr/lib/sw/ui/C/smc_dsa.ui, 8100 bytes, 16 tape blocks
x ./usr/lib/sw/ui/C/smc_init.ui, 708 bytes, 2 tape blocks
x ./usr/lib/sw/ui/C/smc_install.ui, 4018 bytes, 8 tape blocks
x ./usr/lib/sw/ui/C/smc_jobopts.ui, 116062 bytes, 227 tape blocks
x ./usr/lib/sw/ui/C/smc_jobs.ui, 20222 bytes, 40 tape blocks
x ./usr/lib/sw/ui/C/smc_list.ui, 1962 bytes, 4 tape blocks
x ./usr/lib/sw/ui/C/smc_menudefs.h, 1792 bytes, 4 tape blocks
x ./usr/lib/sw/ui/C/smc_options.ui, 5889 bytes, 12 tape blocks
x ./usr/lib/sw/ui/C/smc_patch.ui, 2527 bytes, 5 tape blocks
x ./usr/lib/sw/ui/C/smc_remove.ui, 3289 bytes, 7 tape blocks
x ./usr/lib/sw/ui/C/smc_rmsourc.ui, 2411 bytes, 5 tape blocks
x ./usr/lib/sw/ui/C/smc_sched.ui, 4591 bytes, 9 tape blocks
x ./usr/lib/sw/ui/C/smc_selalt.ui, 2804 bytes, 6 tape blocks
x ./usr/lib/sw/ui/C/smc_seldpt.ui, 2404 bytes, 5 tape blocks
x ./usr/lib/sw/ui/C/smc_session.ui, 2180 bytes, 5 tape blocks
x ./usr/lib/sw/ui/C/smc_softinf.ui, 5653 bytes, 12 tape blocks
x ./usr/lib/sw/ui/C/smc_softwar.ui, 18847 bytes, 37 tape blocks
x ./usr/lib/sw/ui/C/smc_source.ui, 4902 bytes, 10 tape blocks
x ./usr/lib/sw/ui/C/smc_targets.ui, 12190 bytes, 24 tape blocks
x ./usr/lib/sw/ui/C/smc_task.ui, 5805 bytes, 12 tape blocks
x ./usr/lib/sw/help/C/sduhelp.hv, 28436 bytes, 56 tape blocks
x ./usr/lib/sw/help/C/sduhelp.hvk, 5145 bytes, 11 tape blocks
x ./usr/lib/sw/help/C/sduhelp00.ht, 215428 bytes, 421 tape blocks
x ./usr/lib/sw/help/C/sduhelp01.ht, 14210 bytes, 28 tape blocks
x ./usr/lib/libM.1 symbolic link to ./libm.1
x ./usr/lib/libm.1, 98773 bytes, 193 tape blocks
x ./usr/lib/libm.2, 188416 bytes, 368 tape blocks
x ./usr/lib/libcma.1, 466944 bytes, 912 tape blocks
x ./usr/lib/libcma.2, 487424 bytes, 952 tape blocks
x ./usr/lib/libcma.sl symbolic link to ./libcma.2
x ./usr/lib/libd4r.1, 45056 bytes, 88 tape blocks
x ./usr/lib/libd4r.sl symbolic link to ./libd4r.1
x ./usr/lib/libdce.1, 4235264 bytes, 8272 tape blocks
x ./usr/lib/libdce.2, 4313088 bytes, 8424 tape blocks
x ./usr/lib/libdce.sl symbolic link to ./libdce.2
x ./usr/lib/libdcekt.1, 4550656 bytes, 8888 tape blocks
x ./usr/lib/dld.sl, 270336 bytes, 528 tape blocks
x ./usr/lib/libsmapi.so.2, 167224 bytes, 327 tape blocks
x ./usr/sbin/mk_kernel, 3117 bytes, 7 tape blocks
x ./usr/sbin/kconfig, 830000 bytes, 1622 tape blocks
x ./usr/sbin/insf symbolic link to /sbin/mksf
x ./usr/sbin/ioinit symbolic link to /sbin/ioinit
x ./usr/sbin/ioscan symbolic link to /sbin/ioscan
x ./usr/sbin/mknod symbolic link to /sbin/mknod
x ./usr/sbin/mount symbolic link to /sbin/mount
x ./usr/sbin/reboot symbolic link to /sbin/reboot
x ./usr/sbin/umount symbolic link to /sbin/umount
x ./usr/sbin/devnm, 69360 bytes, 136 tape blocks
x ./usr/sbin/diskinfo, 78620 bytes, 154 tape blocks
x ./usr/sbin/setboot, 230072 bytes, 450 tape blocks
x ./usr/sbin/swapon, 81060 bytes, 159 tape blocks
x ./usr/sbin/chroot, 69196 bytes, 136 tape blocks
x ./usr/sbin/efi_cp, 228328 bytes, 446 tape blocks
x ./usr/sbin/efi_fsinit, 158292 bytes, 310 tape blocks
x ./usr/sbin/efi_ls, 159248 bytes, 312 tape blocks
x ./usr/sbin/efi_mkdir, 160152 bytes, 313 tape blocks
x ./usr/sbin/efi_rm, 158768 bytes, 311 tape blocks
x ./usr/sbin/efi_rmdir, 158856 bytes, 311 tape blocks
x ./usr/sbin/rvxdump symbolic link to /usr/lbin/fs/vxfs/vxdump
x ./usr/sbin/rvxrestore symbolic link to /usr/lbin/fs/vxfs/vxrestore
x ./usr/sbin/vxdump symbolic link to /usr/lbin/fs/vxfs/vxdump
x ./usr/sbin/vxrestore symbolic link to /usr/lbin/fs/vxfs/vxrestore
x ./usr/sbin/swagentd, 1182936 bytes, 2311 tape blocks
x ./usr/sbin/swacl, 4591176 bytes, 8968 tape blocks
./usr/sbin/swconfig linked to ./usr/sbin/swacl
./usr/sbin/swcopy linked to ./usr/sbin/swacl
./usr/sbin/swinstall linked to ./usr/sbin/swacl
./usr/sbin/swlist linked to ./usr/sbin/swacl
x ./usr/sbin/swmodify, 2549500 bytes, 4980 tape blocks
./usr/sbin/swpackage linked to ./usr/sbin/swmodify
./usr/sbin/swreg linked to ./usr/sbin/swacl
./usr/sbin/swremove linked to ./usr/sbin/swacl
./usr/sbin/swverify linked to ./usr/sbin/swacl
x ./usr/bin/lifcp, 155640 bytes, 304 tape blocks
x ./usr/bin/lifls, 81300 bytes, 159 tape blocks
x ./usr/bin/lifrm, 82696 bytes, 162 tape blocks
x ./usr/bin/getopts, 163 bytes, 1 tape blocks
x ./usr/bin/basename, 69084 bytes, 135 tape blocks
x ./usr/bin/chgrp, 70816 bytes, 139 tape blocks
x ./usr/bin/cmp, 69616 bytes, 136 tape blocks
x ./usr/bin/cp, 74832 bytes, 147 tape blocks
x ./usr/bin/cut, 70088 bytes, 137 tape blocks
x ./usr/bin/dd, 71312 bytes, 140 tape blocks
x ./usr/bin/dirname, 69016 bytes, 135 tape blocks
x ./usr/bin/egrep, 70732 bytes, 139 tape blocks
x ./usr/bin/expr, 71192 bytes, 140 tape blocks
x ./usr/bin/false, 68788 bytes, 135 tape blocks
./usr/bin/fgrep linked to ./usr/bin/egrep
./usr/bin/grep linked to ./usr/bin/egrep
x ./usr/bin/hostname, 69212 bytes, 136 tape blocks
x ./usr/bin/kill, 70012 bytes, 137 tape blocks
x ./usr/bin/ln, 70828 bytes, 139 tape blocks
x ./usr/bin/model, 72824 bytes, 143 tape blocks
x ./usr/bin/ps, 140692 bytes, 275 tape blocks
x ./usr/bin/pwd, 69396 bytes, 136 tape blocks
x ./usr/bin/rm, 73696 bytes, 144 tape blocks
./usr/bin/rmdir linked to ./usr/bin/rm
x ./usr/bin/sed, 138204 bytes, 270 tape blocks
x ./usr/bin/sort, 140340 bytes, 275 tape blocks
x ./usr/bin/tar, 146032 bytes, 286 tape blocks
x ./usr/bin/touch, 69800 bytes, 137 tape blocks
x ./usr/bin/true, 68784 bytes, 135 tape blocks
x ./usr/bin/ttytype, 71032 bytes, 139 tape blocks
x ./usr/bin/wc, 69684 bytes, 137 tape blocks
x ./usr/bin/compress, 72316 bytes, 142 tape blocks
x ./usr/bin/ed, 150652 bytes, 295 tape blocks
x ./usr/bin/find, 146612 bytes, 287 tape blocks
x ./usr/bin/getopt, 69348 bytes, 136 tape blocks
x ./usr/bin/id, 69840 bytes, 137 tape blocks
x ./usr/bin/more, 221532 bytes, 433 tape blocks
x ./usr/bin/tail, 71596 bytes, 140 tape blocks
./usr/bin/uncompress linked to ./usr/bin/compress
./usr/bin/zcat linked to ./usr/bin/compress
x ./usr/bin/bdf, 70780 bytes, 139 tape blocks
x ./usr/bin/diff, 140704 bytes, 275 tape blocks
x ./usr/bin/mt, 75944 bytes, 149 tape blocks
x ./usr/bin/ftp, 347516 bytes, 679 tape blocks
x ./usr/bin/rcp, 143792 bytes, 281 tape blocks
x ./usr/bin/remsh, 139636 bytes, 273 tape blocks
x ./usr/bin/ex, 719708 bytes, 1406 tape blocks
./usr/bin/vi linked to ./usr/bin/ex
x ./usr/bin/uname, 565088 bytes, 1104 tape blocks
x ./usr/share/lib/terminfo/h/hp, 1448 bytes, 3 tape blocks
x ./usr/share/lib/terminfo/v/vt100, 1358 bytes, 3 tape blocks
x ./usr/share/lib/terminfo/v/vt220, 1570 bytes, 4 tape blocks
x ./usr/share/lib/terminfo/w/wy60, 1673 bytes, 4 tape blocks
x ./usr/conf/gen/templates/generic, 552 bytes, 2 tape blocks
x ./usr/ccs/lbin/cpp, 279692 bytes, 547 tape blocks
x ./usr/obam/lbin/gethelp, 1245184 bytes, 2432 tape blocks
x ./usr/obam/lbin/ui_exec, 26112 bytes, 51 tape blocks
x ./usr/obam/lib/libIDMawrt.1, 2682880 bytes, 5240 tape blocks
x ./usr/obam/lib/libIDMawrt.sl symbolic link to ./libIDMawrt.1
x ./usr/obam/lib/libobam.1, 1040384 bytes, 2032 tape blocks
x ./usr/obam/lib/libobam.sl symbolic link to ./libobam.1
x ./usr/obam/lib/obam_aw.dmb, 35365 bytes, 70 tape blocks
x ./usr/obam/lib/libIDMawrt.so.1, 4750516 bytes, 9279 tape blocks
x ./usr/obam/lib/libobam.so symbolic link to ./libobam.so.1
x ./usr/obam/lib/libobam.so.1, 1954216 bytes, 3817 tape blocks
x ./usr/obam/lib/obam_aw_ia.dmb, 35899 bytes, 71 tape blocks
x ./usr/obam/lib/help/C/ui/ui.sdl, 80960 bytes, 159 tape blocks
x ./usr/contrib/bin/gunzip, 218692 bytes, 428 tape blocks
./usr/contrib/bin/gzip linked to ./usr/contrib/bin/gunzip
x ./usr/sam/lbin/cmenu, 1973752 bytes, 3855 tape blocks
x ./usr/sam/lib/hpux32/libsysmgmt.so, 998652 bytes, 1951 tape blocks
x ./sbin/fs/cdfs/umount symbolic link to /sbin/fs/hfs/umount
x ./sbin/fs/cdfs/mount, 655384 bytes, 1281 tape blocks
x ./sbin/fs/cdfs/statvfsdev, 628748 bytes, 1229 tape blocks
x ./sbin/fs/fsdaemon, 1616512 bytes, 3158 tape blocks
x ./sbin/fs/hfs/fsck, 884860 bytes, 1729 tape blocks
x ./sbin/fs/hfs/mount, 655936 bytes, 1282 tape blocks
x ./sbin/fs/hfs/statvfsdev, 628144 bytes, 1227 tape blocks
x ./sbin/fs/hfs/umount, 567832 bytes, 1110 tape blocks
x ./sbin/fs/vxfs/fsck, 3279352 bytes, 6405 tape blocks
x ./sbin/fs/vxfs/mount, 2695052 bytes, 5264 tape blocks
x ./sbin/fs/vxfs/statvfsdev, 823304 bytes, 1609 tape blocks
x ./sbin/fs/vxfs/umount symbolic link to /sbin/fs/hfs/umount
x ./sbin/fs/vxfs5.0/fsck, 4538224 bytes, 8864 tape blocks
x ./sbin/fs/vxfs5.0/mount, 3857924 bytes, 7536 tape blocks
x ./sbin/fs/vxfs5.0/statvfsdev, 2352504 bytes, 4595 tape blocks
x ./sbin/fsck symbolic link to ./fs_wrapper
x ./sbin/awk, 1198048 bytes, 2340 tape blocks
x ./sbin/cat, 644408 bytes, 1259 tape blocks
x ./sbin/chmod, 637392 bytes, 1245 tape blocks
x ./sbin/chown, 717148 bytes, 1401 tape blocks
x ./sbin/date, 712752 bytes, 1393 tape blocks
x ./sbin/frecover, 906888 bytes, 1772 tape blocks
x ./sbin/init, 1890708 bytes, 3693 tape blocks
x ./sbin/insf, 1224216 bytes, 2392 tape blocks
x ./sbin/ioinit, 818212 bytes, 1599 tape blocks
x ./sbin/ioscan, 1090292 bytes, 2130 tape blocks
x ./sbin/krsd, 715300 bytes, 1398 tape blocks
x ./sbin/ls, 789344 bytes, 1542 tape blocks
x ./sbin/mkboot, 817128 bytes, 1596 tape blocks
x ./sbin/mkdir, 638056 bytes, 1247 tape blocks
x ./sbin/mknod, 565988 bytes, 1106 tape blocks
x ./sbin/mount, 739140 bytes, 1444 tape blocks
x ./sbin/mv, 654932 bytes, 1280 tape blocks
x ./sbin/pax, 1167592 bytes, 2281 tape blocks
x ./sbin/reboot, 750064 bytes, 1465 tape blocks
x ./sbin/stty, 644188 bytes, 1259 tape blocks
x ./sbin/umount, 655260 bytes, 1280 tape blocks
x ./sbin/restore, 816348 bytes, 1595 tape blocks
x ./etc/opt/swm/swm.conf.template, 40352 bytes, 79 tape blocks
x ./etc/group, 184 bytes, 1 tape blocks
x ./etc/passwd, 332 bytes, 1 tape blocks
x ./etc/magic, 9014 bytes, 18 tape blocks
x ./etc/nfssec.conf, 1209 bytes, 3 tape blocks
x ./etc/hosts, 486 bytes, 1 tape blocks
x ./etc/services, 12275 bytes, 24 tape blocks
x ./etc/inetsvcs.conf, 15 bytes, 1 tape blocks
x ./etc/nsswitch.conf, 382 bytes, 1 tape blocks
x ./opt/swm/lib/libexpat.COPYING, 1346 bytes, 3 tape blocks
x ./opt/swm/lib/libexpat.so.5, 378484 bytes, 740 tape blocks
x ./opt/ignite/share/man/man1m.Z/print_manifest.1m, 1428 bytes, 3 tape blocks
x ./opt/ignite/binia/print_manifest, 146300 bytes, 286 tape blocks
x ./opt/ignite/bin symbolic link to /opt/ignite/binia
x ./opt/swm.iux/TUI/OEoverview.cmu, 5664 bytes, 12 tape blocks
x ./opt/swm.iux/TUI/OEoverview.init, 557 bytes, 2 tape blocks
x ./opt/swm.iux/TUI/TUIController, 48183 bytes, 95 tape blocks
x ./opt/swm.iux/TUI/addServer.sh, 1296 bytes, 3 tape blocks
x ./opt/swm.iux/TUI/chSWView.cmu, 3705 bytes, 8 tape blocks
x ./opt/swm.iux/TUI/changeOption.sh, 330 bytes, 1 tape blocks
x ./opt/swm.iux/TUI/formatTree.sh, 2122 bytes, 5 tape blocks
x ./opt/swm.iux/TUI/getHelp, 1711 bytes, 4 tape blocks
x ./opt/swm.iux/TUI/help.cmu, 3115 bytes, 7 tape blocks
x ./opt/swm.iux/TUI/jobMgmt.cmu, 2307 bytes, 5 tape blocks
x ./opt/swm.iux/TUI/launch.cmu, 1497 bytes, 3 tape blocks
x ./opt/swm.iux/TUI/logView.cmu, 2930 bytes, 6 tape blocks
x ./opt/swm.iux/TUI/logView.init, 181 bytes, 1 tape blocks
x ./opt/swm.iux/TUI/openSource.cmu, 10198 bytes, 20 tape blocks
x ./opt/swm.iux/TUI/openSource.init, 4790 bytes, 10 tape blocks
x ./opt/swm.iux/TUI/optionHelp.cmu, 2068 bytes, 5 tape blocks
x ./opt/swm.iux/TUI/pickOE.cmu, 10106 bytes, 20 tape blocks
x ./opt/swm.iux/TUI/pickOE.init, 874 bytes, 2 tape blocks
x ./opt/swm.iux/TUI/reboot.cmu, 1929 bytes, 4 tape blocks
x ./opt/swm.iux/TUI/resumeSavedJob.cmu, 924 bytes, 2 tape blocks
x ./opt/swm.iux/TUI/setOptions.cmu, 2196 bytes, 5 tape blocks
x ./opt/swm.iux/TUI/uimsg, 18691152 bytes, 36507 tape blocks
x ./opt/swm.iux/TUI/updatePrep, 2728 bytes, 6 tape blocks
x ./opt/swm.iux/TUI/viewSW.cmu, 5474 bytes, 11 tape blocks
x ./opt/swm.iux/TUI/viewSW.init, 1800 bytes, 4 tape blocks
x ./opt/swm.iux/bin/swm, 19731720 bytes, 38539 tape blocks
x ./opt/swm.iux/lbin/smdcmd, 23880 bytes, 47 tape blocks
x ./opt/swm.iux/help/C/OEoverview.txt, 2504 bytes, 5 tape blocks
x ./opt/swm.iux/help/C/chSWView.txt, 3835 bytes, 8 tape blocks
x ./opt/swm.iux/help/C/help.txt, 2120 bytes, 5 tape blocks
x ./opt/swm.iux/help/C/jobMgmt.txt, 2078 bytes, 5 tape blocks
x ./opt/swm.iux/help/C/launch.txt, 3442 bytes, 7 tape blocks
x ./opt/swm.iux/help/C/logView.txt, 3892 bytes, 8 tape blocks
x ./opt/swm.iux/help/C/openSource.txt, 3548 bytes, 7 tape blocks
x ./opt/swm.iux/help/C/optionHelp.txt, 1045 bytes, 3 tape blocks
x ./opt/swm.iux/help/C/pickOE.txt, 3688 bytes, 8 tape blocks
x ./opt/swm.iux/help/C/reboot.txt, 1537 bytes, 4 tape blocks
x ./opt/swm.iux/help/C/setOptions.txt, 1968 bytes, 4 tape blocks
x ./opt/swm.iux/help/C/viewSW-install.txt, 4319 bytes, 9 tape blocks
x ./opt/swm.iux/help/C/viewSW-oeupdate.txt, 4476 bytes, 9 tape blocks
x ./var/opt/ignite/local/manifest/template.def, 14441 bytes, 29 tape blocks
x ./var/adm/sw/security/_ACL, 40 bytes, 1 tape blocks
x ./var/adm/sw/security/_OWNER, 62 bytes, 1 tape blocks
x ./var/adm/sw/security/_PROD_DFLT_ACL, 55 bytes, 1 tape blocks
x ./var/adm/sw/security/_SOC_DFLT_ACL, 55 bytes, 1 tape blocks
x ./var/adm/sw/security/secrets, 15 bytes, 1 tape blocks
x ./var/adm/sw/defaults, 1383 bytes, 3 tape blocks
x ./dev/config, 0 bytes, 0 blocks, character device
x ./dev/null, 0 bytes, 0 blocks, character device
x ./dev/console, 0 bytes, 0 blocks, character device
x ./dev/kmem, 0 bytes, 0 blocks, character device
x ./dev/mem, 0 bytes, 0 blocks, character device
x ./dev/rroot, 0 bytes, 0 blocks, character device
x ./dev/root, 0 bytes, 0 blocks, character device
x ./dev/tty, 0 bytes, 0 blocks, character device
x ./dev/syscon, 0 bytes, 0 blocks, character device
x ./dev/systty, 0 bytes, 0 blocks, character device
x ./tmp/set_locale, 3305 bytes, 7 tape blocks
x ./configure3, 2961760 bytes, 5785 tape blocks
x ./monitor_bpr, 2275312 bytes, 4444 tape blocks
* Download_mini-system: Complete
* Loading_software: Begin

[Read only - use Ctrl-Ecf for console write access.]
* Installing boot area on disk.

[Read only - use Ctrl-Ecf for console write access.]
* Formatting HP Service Partition.
* Enabling swap areas.
* Backing up LVM configuration for "vg00".
* Processing the archive source (Recovery Archive).
* Sat Jan 31 05:03:46 EST 2009: Starting archive load of the source
(Recovery Archive).
* Positioning the tape (/dev/rmt/c3t6d0BESTn).
* Looking for Archive...
* Found the Archive Position. Now load the Archive.
* Archive extraction from tape is beginning. Please wait.

[Joe Profaizer]

Latest update: System is now rebooting and I disconnected the tape device:


* Sat Jan 31 05:57:06 EST 2009: Completed archive load of the source
(Recovery Archive).
* Executing user specified script:
"/opt/ignite/data/scripts/os_arch_post_l".
* Running in recovery mode (os_arch_post_l).
* Relocating RAM filesystems.
* Running the ioinit command ("/sbin/ioinit -c")
* Creating device files via the insf command.
insf: Installing special files for sdisk instance 2 address 0/0/3/0.0.0.0
insf: Installing special files for sdisk instance 1 address 0/1/1/0.0.0
insf: Installing special files for sdisk instance 0 address 0/1/1/0.1.0
insf: Installing special files for esdisk instance 4 address 64000/0xfa00/0x1
insf: Installing special files for esdisk instance 3 address 64000/0xfa00/0x2
insf: Installing special files for esdisk instance 5 address 64000/0xfa00/0x4
insf: Installing special files for stape instance 0 address 0/1/1/1.6.0
insf: Installing special files for estape instance 1 address 64000/0xfa00/0x3
insf: Installing special files for pseudo driver dlpi
insf: Installing special files for pseudo driver kepd
insf: Installing special files for pseudo driver framebuf
insf: Installing special files for pseudo driver sad
* Creating the system file.
Creating your system file in the file /tmp/ign_configure/tstand.system
* Constructing the bootconf file.
* Setting primary boot path to "0/1/1/0.0x1.0x0".
Primary boot path set to 0/1/1/0.0x1.0x0 (/dev/rdisk/disk4)
* Executing: "/var/adm/sw/products/OS-Core/CORE-SHLIBS/iux_postload".
* Running: /var/adm/sw/products/OS-Core/CORE-SHLIBS/postinstall
* Executing: "/var/adm/sw/products/OS-Core/CORE2-KRN/iux_postload".
* Executing: "/var/adm/sw/products/OS-Core/CORE-KRN/iux_postload".
* Executing: "/var/adm/sw/products/FC-FCD/FC-FCD-KRN/iux_postload".
* Loading_software: Complete
======= 01/31/09 04:57:22 CST Building the new kernel.
* Build_Kernel: Begin
* Building a new kernel using the command: "/usr/sbin/mk_kernel -f -o
/stand/vmunix".
* The currently running configuration has been imported from
'/stand/system'.
* Build_Kernel: Complete
* Boot_From_Client_Disk: Begin
WARNING: failed to remove(/dev/deviceFileSystem): File exists (errno = 17)
======= 01/31/09 04:57:43 CST Rebooting machine as expected.
NOTE: Rebooting system.

[Read only - use Ctrl-Ecf for console write access.]
Calling function e000000001c9c480 for Shutdown State 1 type 0x1

sync'ing disks (0 buffers to flush):
0 fcache pages still dirty
0 buffers not flushed
0 buffers still dirty
Calling function e000000002838940 for Shutdown State 5 type 0x1
Calling function e000000001f019f0 for Shutdown State 5 type 0x1

Closing open logical volumes...
Done
***********************************************************
* ROM Version : 04.29
* ROM Date : 12/10/2007
* BMC Version : 04.06
***********************************************************
0 0 0x0015B2 0x0000000021751696 boot time event
1 0 0x0000A4 0x0000000000000000 start memory configuration
0 0 0x0015B2 0x0000000057290046 boot time event
1 0 0x000014 0x0000000000000000 CPU0 starting cell relocation
1 0 0x000009 0x0000000000000000 CPU0 launch EFI
EFI version 1.10 [14.62]
EFI64 Running on Intel(R) Itanium Processor Family
EFI 1.10 IPF server rx4640 5.48 [Thu Nov 10 15:08:03 2005] firmware by HP
Loading 'SysROM:Floating-Point Software Assistance Handler'...
-- 'SysROM:Floating-Point Software Assistance Handler' returned Success
Loading 'SysROM:Broadcom Gigabit Ethernet Driver'...

Copyright (c) 2000-2005 Broadcom Corporation
Broadcom NetXtreme Gigabit Ethernet EFI driver v7.0.10

-- 'SysROM:Broadcom Gigabit Ethernet Driver' returned Success
Loading 'SysROM:SCSI Bus Driver'...
-- 'SysROM:SCSI Bus Driver' returned Success
Loading 'SysROM:SCSI Tape Driver'...
-- 'SysROM:SCSI Tape Driver' returned Success
Loading device drivers
































EFI Boot Manager ver 1.10 [14.62] OS might use only the primary console set via boot manager or conconfig command
/----------------------------------\ /----------------------------------\ | System Overview | | Boot Menu | | hp server rx4640 | | HP-UX Primary Boot: 0/1/1/0.... | | Serial #: USE4414736 | | Core LAN Gb A | | | | EFI Shell [Built-in] | | System Firmware: 4.29 [4750] | | Boot Disk | | BMC Version: 4.06 | | Internal Bootable DVD | | MP Version: E.03.32 | | ------------------------------- | | Installed Memory: 32768 MB | | Boot Configuration | | | | System Configuration | | CPU Logical | | Security Configuration | | Module CPUs Speed Status | | | | 0 1 1.5 GHz Active | \----------------------------------/ | 1 1 1.5 GHz Active | | 2 1 1.5 GHz Active | | 3 1 1.5 GHz Active | | | | | \----------------------------------/
Use <^|v> to scroll to Select or for Previous Menu

Scsi(Pun1,Lun0) HP 73.4GST373453LC HPC4 (160 MBytes/sec)
Loading.: HP-UX Primary Boot: 0/1/1/0.0x1.0x0
Starting: HP-UX Primary Boot: 0/1/1/0.0x1.0x0

(C) Copyright 1999-2006 Hewlett-Packard Development Company, L.P.
All rights reserved

HP-UX Boot Loader for IPF -- Revision 2.035

Press Any Key to interrupt Autoboot
\EFI\HPUX\AUTO ==> boot vmunix
Seconds left till autoboot - 0
AUTOBOOTING...> System Memory = 32739 MB
loading section 0
.................................................................................. (complete)
loading section 1
............. (complete)
loading symbol table
loading System Directory (boot.sys) to MFS
.....
loading MFSFILES directory (bootfs) to MFS
.....................
Launching /stand/vmunix
SIZE: Text:41544K + Data:6397K + BSS:21890K = Total:69832K
Console is on Serial Device - via PCDP
Booting kernel...

[Joe Profaizer]

Still hangs at same place:

Console is on Serial Device - via PCDP
Booting kernel...


[Read only - use Ctrl-Ecf for console write access.]
Loaded ACPI revision 2.0 tables.
Using /stand/ext_ioconfig

Memory Class Setup
-------------------------------------------------------------------------
Class Physmem Lockmem Swapmem
-------------------------------------------------------------------------
System : 31139 MB 31139 MB 31139 MB
Kernel : 31139 MB 31139 MB 31139 MB
User : 29880 MB 26490 MB 26593 MB
-------------------------------------------------------------------------

Starting ktracer 0 1
Installing Socket Protocol families AF_INET and AF_INET6
Kernel EVM initialized
sec_init(): kernel RPC authentication/security initialization.
secgss_init(): kernel RPCSEC_GSS security initialization.
rpc_init(): kernel RPC initialization.
rpcmod_install(): kernel RPC STREAMS module "rpcmod" installation. ...(driver_install)
NOTICE: nfs_client_pv3_install(): nfs3 File system was registered at index 11.
NOTICE: nfs_client_pv4_install(): nfs4 File system was registered at index 12.
NOTICE: cachefsc_install: cachefs File system was registered at index 14.
td: claimed Tachyon XL2 Fibre Channel Mass Storage card at 0/2/1/0
td: claimed Tachyon XL2 Fibre Channel Mass Storage card at 0/5/1/0
Boot device's HP-UX HW path is: 0.1.1.0.1.0

System Console is on the Built-In Serial Interface
igelan0: INITIALIZING HP A6825-60101 PCI 1000Base-T Adapter at hardware path 0/1/2/0
AF_INET socket/streams output daemon running, pid 41
afinet_prelink: module installed
Starting the STREAMS daemons-phase 1
LVM: Root VG activated
Swap device table: (start & size given in 512-byte blocks)
entry 0 - major is 64, minor is 0x2; start = 0, size = 16777216
The device file /dev/rroot does not exist or is not correct.
Automatic checks of the root file system not performed.
Create STCP device files
Starting the STREAMS daemons-phase 2
$Revision: vmunix: B.11.31_LR FLAVOR=perf
Memory Information:
physical page size = 4096 bytes, logical page size = 4096 bytes
Physical: 33524756 Kbytes, lockable: 25192676 Kbytes, available: 28475124 Kbytes

insf: Installing special files for sdisk instance 2 address 0/0/3/0.0.0.0
insf: Installing special files for sdisk instance 1 address 0/1/1/0.0.0
insf: Installing special files for sdisk instance 0 address 0/1/1/0.1.0
insf: Installing special files for esdisk instance 4 address 64000/0xfa00/0x1
insf: Installing special files for esdisk instance 3 address 64000/0xfa00/0x2
insf: Installing special files for esdisk instance 5 address 64000/0xfa00/0x4

**********
HANGS HERE
***************

[Joe Profaizer]

I tried to boot in Maintenance Mode to no avail. Output follows:


HPUX> hpux -lm
> System Memory = 32739 MB
loading section 0
.................................................................................. (complete)
loading section 1
............. (complete)
loading symbol table
loading System Directory (boot.sys) to MFS
.....
loading MFSFILES directory (bootfs) to MFS
.....................
Launching /stand/vmunix
SIZE: Text:41544K + Data:6397K + BSS:21890K = Total:69832K
Console is on Serial Device - via PCDP
Booting kernel...


[Read only - use Ctrl-Ecf for console write access.]
Loaded ACPI revision 2.0 tables.
Using /stand/ext_ioconfig

Memory Class Setup
-------------------------------------------------------------------------
Class Physmem Lockmem Swapmem
-------------------------------------------------------------------------
System : 31139 MB 31139 MB 31139 MB
Kernel : 31139 MB 31139 MB 31139 MB
User : 29880 MB 26490 MB 26593 MB
-------------------------------------------------------------------------

Starting ktracer 0 1
Installing Socket Protocol families AF_INET and AF_INET6
Kernel EVM initialized
sec_init(): kernel RPC authentication/security initialization.
secgss_init(): kernel RPCSEC_GSS security initialization.
rpc_init(): kernel RPC initialization.
rpcmod_install(): kernel RPC STREAMS module "rpcmod" installation. ...(driver_install)
NOTICE: nfs_client_pv3_install(): nfs3 File system was registered at index 11.
NOTICE: nfs_client_pv4_install(): nfs4 File system was registered at index 12.
NOTICE: cachefsc_install: cachefs File system was registered at index 14.
td: claimed Tachyon XL2 Fibre Channel Mass Storage card at 0/2/1/0
td: claimed Tachyon XL2 Fibre Channel Mass Storage card at 0/5/1/0
Boot device's HP-UX HW path is: 0.1.1.0.1.0

System Console is on the Built-In Serial Interface
igelan0: INITIALIZING HP A6825-60101 PCI 1000Base-T Adapter at hardware path 0/1/2/0
AF_INET socket/streams output daemon running, pid 41
afinet_prelink: module installed
Starting the STREAMS daemons-phase 1
Swap device table: (start & size given in 512-byte blocks)
entry 0 - major is 64, minor is 0x2; start = 0, size = 16777216
The device file /dev/rroot does not exist or is not correct.
Automatic checks of the root file system not performed.

Stored message buffer up to system crash:

MFS is defined: base= 0xe000000101ba3000 size= 26788 KB
Loaded ACPI revision 2.0 tables.
MMIO on this platform supports Write Coalescing.


MCA recovery subsystem disabled, not supported on this platform.
Using /stand/ext_ioconfig

Memory Class Setup
-------------------------------------------------------------------------
Class Physmem Lockmem Swapmem
-------------------------------------------------------------------------
System : 31139 MB 31139 MB 31139 MB
Kernel : 31139 MB 31139 MB 31139 MB
User : 29880 MB 26490 MB 26593 MB
-------------------------------------------------------------------------

Starting ktracer 0 1
Installing Socket Protocol families AF_INET and AF_INET6
64000/0xfa00 esvroot
Kernel EVM initialized
sec_init(): kernel RPC authentication/security initialization.
secgss_init(): kernel RPCSEC_GSS security initialization.
rpc_init(): kernel RPC initialization.
rpcmod_install(): kernel RPC STREAMS module "rpcmod" installation. ...(driver_install)
NOTICE: nfs_client_pv3_install(): nfs3 File system was registered at index 11.
NOTICE: nfs_client_pv4_install(): nfs4 File system was registered at index 12.
NOTICE: cachefsc_install: cachefs File system was registered at index 14.
btlan_load() Loaded Successfully
0 sba
0/0 lba
0/0/1/0 asio0
0/0/1/1 asio0
0/0/2/0 UsbOhci
0/0/2/1 UsbOhci
0/0/2/2 UsbEhci
0/0/3/0 side_multi
0/0/3/0.0 side
0/0/3/0.1 side
0/0/3/0.0.0x0 estp
0/0/4/0 gvid_core
0/1 lba
0/1/1 pci_slot
c8xx BUS: 2 SCSI C1010 Ultra160 Wide LVD A6829-60101 assigned CPU: 0
0/1/1/0 c8xx
c8xx BUS: 3 SCSI C1010 Ultra160 Wide LVD A6829-60101 assigned CPU: 3
0/1/1/1 c8xx
0/1/2 pci_slot
0/1/2/0 igelan
0/2 lba
0/2/1 pci_slot
0/1/1/0.0x4 estp
0/1/1/0.0x4.0x0 eslpt
0/1/1/0.0x1 estp
0/1/1/0.0x0 estp
0/1/1/0.4 tgt
0/1/1/0.4.0 sctl
0/1/1/0.0x1.0x0 eslpt
0/1/1/0.1 tgt
0/1/1/0.1.0 sdisk
0/1/1/0.0x0.0x0 eslpt
0/1/1/0.0 tgt
0/1/1/0.0.0 sdisk
0/0/3/0.0.0x0.0x0 eslpt
0/0/3/0.0.0 tgt
0/0/3/0.0.0.0 sdisk
td: claimed Tachyon XL2 Fibre Channel Mass Storage card at 0/2/1/0
0/2/1/0 td
0/3 lba
0/3/1 pci_slot
0/3/2 pci_slot
0/4 lba
0/4/1 pci_slot
0/4/2 pci_slot
0/5 lba
0/5/1 pci_slot
td: claimed Tachyon XL2 Fibre Channel Mass Storage card at 0/5/1/0
0/5/1/0 td
120 processor
121 processor
122 processor
123 processor
250 pdh
250/0 ipmi
250/1 acpi_node
64000/0xfa00/0x0 esctl
64000/0xfa00/0x1 esdisk
64000/0xfa00/0x2 esdisk
64000/0xfa00/0x4 esdisk
Boot device's HP-UX HW path is: 0.1.1.0.1.0

System Console is on the Built-In Serial Interface
igelan0: INITIALIZING HP A6825-60101 PCI 1000Base-T Adapter at hardware path 0/1/2/0
AF_INET socket/streams output daemon running, pid 41
afinet_prelink: module installed
Starting the STREAMS daemons-phase 1
Swap device table: (start & size given in 512-byte blocks)
entry 0 - major is 64, minor is 0x2; start = 0, size = 16777216
Dump device table: (start & size given in 1-Kbyte blocks)
entry 0000000000000000 - major is 3, minor is 0x1; start = 2349920, size = 8388608
VFS_MOUNTROOT error information:
0:(hfs) 22
1:(nfs) 223
6:(DevFS) 251
10:(vxfs) 28
11:(nfs3) 223
12:(nfs4) 223
13:(autofs) 251
16:(cifs) 223
18:(dnlc_neg_fs) 251

Message buffer contents after system crash:

panic: VFS_MOUNTROOT: RDWR: all VFS_MOUNTROOTs failed: NEED DRIVERS ?????
Stack Trace:
IP Function Name
0xe00000000205f2e0 vfs_mountroot+0x6c0
0xe0000000017bbdf0 im_preinitrc+0x450
0xe000000002050f40 DoCalllist+0x390
End of Stack Trace

linkstamp: Sat Jan 31 04:57:42 CST 2009
_release_version: @(#) $Revision: vmunix: B.11.31_LR FLAVOR=perf
Calling function e0000000018a8100 for Shutdown State 1 type 0x2
i 0 pfn 0x1 pages 0x9f
i 1 pfn 0x100 pages 0x3de24
i 2 pfn 0x3e23c pages 0x2ec
i 3 pfn 0x3fc00 pages 0x220
i 4 pfn 0x100000 pages 0x6ffffe
i 5 pfn 0x4040000 pages 0xbeffe
i 6 pfn 0x40ff000 pages 0xc4a
i 7 pfn 0x40ffc84 pages 0x18e
i 8 pfn 0x40ffe80 pages 0x164
*** Not enough CPUS for a compressed dump ***

*** A system crash has occurred. (See the above messages for details.)
*** The system is now preparing to dump physical memory to disk, for use
*** in debugging the crash.

*** The dump will be a SELECTIVE dump with
compression OFF and concurrency ON: 2657 of 32740 megabytes.
*** To change this dump type, press any key within 10 seconds.
*** Proceeding with selective dump, with compression off and concurrency on.



Primary Dump Header Location :
Device details:
Major number: 31 Minor number:0x21000
Offset: 2349920.
*** The dump may be aborted at any time by pressing ESC.
*** Dumping: 71% complete (1906 of 2657 MB)

[Joe Profaizer]

I have since booted the recovery DVD and am at a # prompt.
I'm not sure what to do here other then wait for the latest DVDs for September 2008 v11.31 as it may have the latest version of Ignite UX. I currently have C.7.5.142. It seems the latest version may have a chance at fixing my issue; what do you think:

Important changes in the Ignite-UX C.7.7.93 September 2008 release

*

A new option (-u) was added to make_[tape|net]_recovery that updates the Ignite-UX software on the client system from the Ignite server, when needed.
*

Supports new hardware enabled by the HP-UX release.
*

This release also includes defect fixes.

Important changes in the Ignite-UX C.7.6.100 June 2008 web release

*

This release fixes an issue where UNCLAIMED devices could result in installation or recovery failure.

Important changes in the Ignite-UX C.7.6.98 June 2008 media release

*

Supports new hardware enabled by the HP-UX release.

[sujit kumar singh]

Hi Joe,

would suggest you to make notice of few things on the Sourve Server.

#lvlnboot -v
#lvlnboot -R
#ioscan
#insf -e
#vi /stand/bootconf

remove any bad entries there.

Take a fresh Ignite backup on the server using
#make_tape_recovery -v -x inc_entire=vg00 -a /dev/rmt/0mn

or whatever is the Tape Drive in there.
Please notice some warnings in the make_tape_recovery being carried out.


As the target system has FW updated i hope you can use that to boot diectly from the Ignite Tape

But before restore of the image, do a

SHELL>map
SHELL> rconnect -r
SHELL>map
SHELL>exit
use the boot entry of tape to boot the tape or use the OS CD to boot and recober from tape.

Choose and advanced and interactive session and choose the Fileysystems to be properly set and also the swap.

Use the Interactive session for restore.

Ignite restore OS keeps working at the point where you earlier doubted that the tape has hung.

Please use an Terminator with the External Tape Drive..
Regards
Sujit

Please at the time of install

[Joe Profaizer]

I'm following your directions before I move forward with the restore (we have the latest fw and it will boot from tape).

Shell> map
Device mapping table
fs0 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun1,Lun0)/HD(Part1,Sig9FD1FA90-EFAC-11DD-8000-D6217B60E588)
fs1 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun1,Lun0)/HD(Part3,Sig9FD1FAEA-EFAC-11DD-8000-D6217B60E588)
fs2 : Acpi(HWP0002,0)/Pci(3|0)/Ata(Primary,Master)/CDROM(Entry0)
fs3 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)/HD(Part1,Sig69542D9A-121A-11D9-8002-D6217B60E588)
blk0 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun1,Lun0)
blk1 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun1,Lun0)/HD(Part1,Sig9FD1FA90-EFAC-11DD-8000-D6217B60E588)
blk2 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun1,Lun0)/HD(Part2,Sig9FD1FAD6-EFAC-11DD-8000-D6217B60E588)
blk3 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun1,Lun0)/HD(Part3,Sig9FD1FAEA-EFAC-11DD-8000-D6217B60E588)
blk4 : Acpi(HWP0002,0)/Pci(3|0)/Ata(Primary,Master)
blk5 : Acpi(HWP0002,0)/Pci(3|0)/Ata(Primary,Master)/CDROM(Entry0)
blk6 : Acpi(HWP0002,0)/Pci(3|0)/Ata(Primary,Master)/CDROM(Entry1)
blk7 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)
blk8 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)/HD(Part1,Sig69542D9A-121A-11D9-8002-D6217B60E588)
blk9 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)/HD(Part2,Sig69542DAE-121A-11D9-8003-D6217B60E588)
blkA : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)/HD(Part3,Sig69542DCC-121A-11D9-8004-D6217B60E588)

Shell> help
List of classes of commands:

boot -- Booting options and disk-related commands
configuration -- Changing and retrieving system information
device -- Getting device, driver and handle information
memory -- Memory related commands
shell -- Basic shell navigation and customization
scripts -- EFI shell-script commands

Use 'help ' for a list of commands in that class
Use 'help ' for full documentation of a command
Use 'help -a' to display list of all commands

Shell> rconnect -r
'rconnect' not found
Exit status code: Invalid Parameter

Shell>
[Read only - use Ctrl-Ecf for console write access.]

[Read only - use Ctrl-Ecf for console write access.]
help device
Device, driver and handle commands:

baud -- Set serial port com settings
connect -- Binds an EFI driver to a device and starts the driver
devices -- Displays the list of devices being managed by EFI drivers
devtree -- Displays the tree of devices that follow the EFI Driver Model
disconnect -- Disconnects one or more drivers from a device
dh -- Displays the handles in the EFI environment
drivers -- Displays the list of drivers that follow the EFI Driver Model
drvcfg -- Invokes the Driver Configuration Protocol
drvdiag -- Invokes the Driver Diagnostics Protocol
guid -- Displays all the GUIDs in the EFI environment
lanaddress -- Display LAN MAC addresses
load -- Loads and optionally connected EFI drivers
loadpcirom -- Loads a PCI Option ROM
map -- Displays or defines mappings
openinfo -- Displays the protocols on a handle and the agents
optload -- Lists all optional ROM-based efi drivers and applications
pci -- Displays PCI devices or PCI function configuration space
reconnect -- Reconnects one or more drivers from a device
unload -- Unloads a protocol image

Use 'help ' for full documentation of a command
Use 'help -a' to display list of all commands

Shell> connect -r

Shell> map
Device mapping table
fs0 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun1,Lun0)/HD(Part1,Sig9FD1FA90-EFAC-11DD-8000-D6217B60E588)
fs1 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun1,Lun0)/HD(Part3,Sig9FD1FAEA-EFAC-11DD-8000-D6217B60E588)
fs2 : Acpi(HWP0002,0)/Pci(3|0)/Ata(Primary,Master)/CDROM(Entry0)
fs3 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)/HD(Part1,Sig69542D9A-121A-11D9-8002-D6217B60E588)
blk0 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun1,Lun0)
blk1 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun1,Lun0)/HD(Part1,Sig9FD1FA90-EFAC-11DD-8000-D6217B60E588)
blk2 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun1,Lun0)/HD(Part2,Sig9FD1FAD6-EFAC-11DD-8000-D6217B60E588)
blk3 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun1,Lun0)/HD(Part3,Sig9FD1FAEA-EFAC-11DD-8000-D6217B60E588)
blk4 : Acpi(HWP0002,0)/Pci(3|0)/Ata(Primary,Master)
blk5 : Acpi(HWP0002,0)/Pci(3|0)/Ata(Primary,Master)/CDROM(Entry0)
blk6 : Acpi(HWP0002,0)/Pci(3|0)/Ata(Primary,Master)/CDROM(Entry1)
blk7 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)
blk8 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)/HD(Part1,Sig69542D9A-121A-11D9-8002-D6217B60E588)
blk9 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)/HD(Part2,Sig69542DAE-121A-11D9-8003-D6217B60E588)
blkA : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)/HD(Part3,Sig69542DCC-121A-11D9-8004-D6217B60E588)