How do you TOC a V-class?

[Jeff Schussele]

Hi All,

I know how to TOC most all other systems, but have never had to TOC a V-class.
I've a situation coming up where I'll probably need to TOC a V2600.
Could someone please provide the method?

Thanks,
Jeff

[Bill McNAMARA_1]

Hi Jeff, it's been a long time since I connected to a V, but recall (on the 2500) that you need to access the test station (workstation) and log on as user sppuser
sp user was our default passwords .

Some windows should be opened automatically, out of which more or less correspond to a GSP interface.

Later,
Bill

[Sajid_1 · Accepted solution]

Jeff:

there is a TOC button in the key switch pannel. Check this for a better view:

http://www.docs.hp.com/cgi-bin/fsearch/framedisplay?top=/hpux/onlinedocs/A3725-96005/A3725-96005_top.html&con=/hpux/onlinedocs/A3725-96005/00/00/12-con.html&toc=/hpux/onlinedocs/A3725-96005/00/00/12-toc.html&searchterms=toc&queryid=20020802-070335

[Sajid_1]

This will be a useful document, which describes almost everything about V class server:

http://www.docs.hp.com/hpux/onlinedocs/A3725-96005/A3725-96005.html

rgds,

[Christopher McCray_1]

Hello,

Through the test station, you should have a window that you can issue comands. The command is do_reset and the command I use is:

do_reset 0 4

This initiates a crash dump and then reboots the V

Hope this helps

Chris

[Patrick Wessel]

Jeff,
You can either press the TOC button near by the power switch or execute the following comman on the Teststation:
do_reset 0 4

[Jeff Schussele]

All,

I don't know, pushing a button seems *awfully* difficult ;~)

Thanks folks, guess I should have perused the puppy before I posted the question. But then again I had the answer in about the same amount of time it would've taken to walk back to the data ctr :~)

Thanks all,
Jeff

P.S. I knew Patrick would chime in on this one - Thanks Patrick. Oh & thanks to those who provided the command line method as well.

Question - is the do_reset 0 4 executed from an SPP session or from the actual console session?

[Christopher McCray_1]

Hello,

From the SPP user session

Chris

[Jeff Schussele]

Thanks Chris.

Jeff