HPE Community
Operating System - HP-UX
1838330 Members
3417 Online
110125 Solutions
New Discussion

How to capture the ODE logs

 
80skeys
Frequent Advisor

‎03-18-2009 06:31 AM

‎03-18-2009 06:31 AM

How to capture the ODE logs

Other than connecting a laptop to the serial / console port, how does one capture the logs from the Offline Diagnostics Environment?
0 Kudos
Reply
4 REPLIES 4
Jozef_Novak
Respected Contributor

‎03-18-2009 06:49 AM

‎03-18-2009 06:49 AM

Re: How to capture the ODE logs

Hello,

you can connect to the MP via LAN from a different HPUX system and use "script" command to capture the terminal session.

See: script(1M)

J.
0 Kudos
Reply
80skeys
Frequent Advisor

‎03-18-2009 07:03 AM

‎03-18-2009 07:03 AM

Re: How to capture the ODE logs

Good idea. But this only works through the dedicated MP Lan port, correct? I don't have it set up, so is there another way?
0 Kudos
Reply
Torsten.
Acclaimed Contributor

‎03-18-2009 08:59 AM

‎03-18-2009 08:59 AM

Re: How to capture the ODE logs

What do you use currently? A real terminal?
This can only send the output to a printer ...

Consider to use a PC with with something like putty and connect serial or setup the GSP IP address.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
80skeys
Frequent Advisor

‎03-18-2009 09:02 AM

‎03-18-2009 09:02 AM

Re: How to capture the ODE logs

Well I guess it can only be done through the console and using a program like Hyperterminal.

Thanks anyway.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.