HPE Community
Operating System - HP-UX
1832352 Members
2310 Online
110041 Solutions
New Discussion

Re: How to link logical volume with redundant Coltroller

 
Supen Kumar Khan
Occasional Contributor

‎07-13-2007 08:28 PM

‎07-13-2007 08:28 PM

How to link logical volume with redundant Coltroller

In my work place there is a VA7110 box having two controller.

I have created one Logical volume over a priticular Storage partition.
How could I link the Logical volume with the second controller of the VA7110 box..pls help me .
0 Kudos
Reply
2 REPLIES 2
Torsten.
Acclaimed Contributor

‎07-13-2007 08:47 PM

‎07-13-2007 08:47 PM

Re: How to link logical volume with redundant Coltroller

run
vgscan -v -p
to find more information and
vgextend vgxx
the alternate path.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
skt_skt
Honored Contributor

‎07-13-2007 10:57 PM

‎07-13-2007 10:57 PM

Re: How to link logical volume with redundant Coltroller

Supen,

Looks like you created a logical unit(LUN) created and wants to make the same LUN visible over the other/alternate path too.
am i correct?

which tool did u used to create the logical volume?

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.