I can't login under X

[Bakos György]

i think the problem can't be in the home directorys, because then the problem were by one user

[Steve Steel]

Hi

For user
Comment out the startfirst in profile

mv $HOME/.dt $HOME/.dtold


Try to login again

Steve Steel

[Bakos György]

Ok uncomment, but why should I mv the .dt



News: I won't to login by command prompt:
user , many too longs and the shell is useless, no ls

login as root(commandprompt) not enough memory.
ls is on function
?????????
top
There is some memory


I try this uncomment

[Alex Glennie]

what h/w are you using here ? PC or hpux workstation ?

does the CDE failsafe session work ? see CDE front panel -> options

POST dr_dt output please.

post nslookup output.

what exactly was removed,lost or corrupted under /var filesystem.

[Bakos György]

where is this startfirs???????
/etc/profile no
In Home/.profile I only see something START

[Bakos György]

10.20 hpux workstation B2000

[Bakos György]

failsafe goes!!!!!!

there is a command prompt(under X)

/etc/profiles[65] there is not enough memory

#

[Alex Glennie]

and the other answers ?

[Bakos György]

Very interesant is at the moment dr_dt
????????????/
But at the moment is failsafe X is running

[Bakos György]

Ok the dr_dt seens ok, but what I see after
dr_dt>/proba
ERROR: The expected depot or root does not exist at "/"
ERROR: There is currently no installed software on host "ltoux084" at location "/"
. (Note that you need to use "swlist -d " to manage depot software).
???????????????


What could it be ?
Where is the dir of CDE?

[Bakos György]

Oh
before
ERROR: The expected depot or root does not exist at "/"
ERROR: There is currently no installed software on host "ltoux084" at location "/"
. (Note that you need to use "swlist -d " to manage depot software).
ifconfig: no such interface



At the moment I am repairing this machine remotly

/When i try the X or failsafe I go to this machine/

[Alex Glennie]

OK so if this is 10.20 how come dr_dt says it's 11.00 ?

I also don't fully understand what you are saying wrt out of memory messages or the output seen after dr_dt ... your last comment.


I suggest running dmesg and a copy of your syslog.log too.

[Bakos György]

Aha
You have right it must be a 11, The others are 10.20


When I type
dr_dt it is the same, but by dr_dt>/proba

Then i see
ERROR: The expected depot or root does not exist at "/"
ERROR: There is currently no installed software on host "ltoux084" at location "/"
. (Note that you need to use "swlist -d " to manage depot software).


interesant

[Bakos György]

/etc/profiles[65] there is not enough memory

by failsafe
That is under command prompt login too.

I think that must be the problem
How can I check something by memory?

[Alex Glennie]

since this is a workstation and you appear to have some devices configured which may lend themselves to CAD or similar, are you trying to run any s/w at user login/ CDE start that might be eating memory ..... ME10 or similar .... just a thought ?

[Bakos György]

No there is nothing that eats so much mem.
But how can i check SWAP, maybe with them is something.
Or how ca i check the state of the memory

[Alex Glennie]

try swapinfo and glance if it's installed ?

[Bakos György]

Root login failsafe:
/etc/profiles[65] There is not enough memory avaible now

command prompt:
swapinfo : OK
top: memory OK(at login is 25752K free after a minute 58516K free)



assy_tst login:

many arg list too long
by type a command
ksh /usr/bin/top: arg list too long


.....................

At profiles 65. line is MANPATH, that is a big file more big the the avaible mem at failsafe login (with the tim more and more memory is free).

This all is the same under login is command prompt(not under X)

But no I see under Xerrors that(You must know, that before I restarted again I probed #export Display=host:0.0 )

I attach Xerrors

[Bakos György]

As you see at the beginn, that here was before another forum.
It can be the problem:
disk failed in / volume
bad detection of hfs filesystem --> vxfs
and now I have edited /etc/fstab hfs to vxfs
Now isn't any problem in fsck, but the problem with this login is the same.

Can I change vxfs to hfs.
Please read a litle the previus forum, maybe then cames the idea.
Thanks

[Bakos György]

How can I determine which was originaly the filesystem on /dev/vg00/rlvol3 mounted /
The mnttab says vxfs, but in the fstab was hfs, now I edited to vxfs

fsck -F vxfs -n /dev/vg00/rlvol3
fileset 999 iau 0 summary incorrect -fix(ynq)n
fsck -F hfs -n /dev/vg00/rlvol3
BAD SUPER BLOCK: MAGIC NUMBER WRONG
...

[Bakos György]

By reload the fsck says: The filesystem was modified.
I am at the moment in panic, I am on monday again here.