1836379 Members
2578 Online
110100 Solutions
New Discussion

Re: Ignite Restore

 
Sanjiv Sharma_1
Honored Contributor

Ignite Restore

Hi,

I have taken the backup of an rp8400 Server with HPUX 11i through command
# make_tape_recovery -a /dev/rmt/2mn -Iv -x inc_entire=vg00
Root Disk of rp8400 is 36 GB.

Now I have a requirement to install this backup on rp5470 Server. Will it be successful?
Root Disk of rp5470 is 18 GB.

What all steps needs to be followed and precautions needs to be taken?

Thanks in advance.
Raje.
Everything is possible
4 REPLIES 4
Animesh Chakraborty
Honored Contributor

Re: Ignite Restore

Hi Raje,
How much is used out of 36 GB ?
do vgdisplay vg00
look for Alloc PE * 4= total in MB
Did you take a backup?
Justo Exposito
Esteemed Contributor

Re: Ignite Restore

Hi Raje,

You can stop the recovery process and interact with it in order to select the necesary part of the make recovery tape to a sucessfull recover.

This is because you don't have enoght disk to recover 36Gb into 18Gb.

Regards,

Justo.
Help is a Beatiful word
harry d brown jr
Honored Contributor

Re: Ignite Restore

Raje,

Well if you were restoring to another RP8400, then these rules usually apply: if you weren't using all 36GB and were using less than 12GB (not a typo - 50% of 18GB + 25% of 18GB), you can restore it, providing you MANUALLY adjust your filesystems, which means you have to interactively restore your system.

But, because you are restoring to an RP5410 from an RP8400, you are going to encounter a lot of issues, but you should be able to get through them. You will have to interactively modify your lan settings, file systems, and a few other things. You got a 80-20 chance of success.

live free or die
harry
Live Free or Die
pap
Respected Contributor

Re: Ignite Restore

Hi Raje,

1. first of all check the used space
of /dev/vg00 in machine rp8400.
If it is less than 18 GB then you can definately restore the tape on new machine.

2. You can recreate the tape on 8400 with minimal OS components and you can restore the same tape to new machine.

3. During ignite restore you can specify the size of file systems if you want to adjust them. For that you need to select advance installation option.

4. You can unmount the file systems occupying more space in /dev/vg00 and then take make_recovery on machine rp8400. This will reduce the make_recovery tape size to significant level.

Hope this helps.

-Piyush.
"Winners don't do different things , they do things differently"