Install SecurePath error!

[Hoang Chi Cong_1]

Please help me:
- SecurePath v3.0F
- All patches require has installed
- Server: HP-UX 11.11
- Storage: EVA3000 and EVA4000
- SAN environment.

When I install SecurePath, error happen when rebuild kernel.
In normal case, after finish installation of SecurePath version 3.0F, server will reboot automaticaly.
But after error happen, server doesn't reboot.
By using "swlist" command I can see SecurePath on the list.

Note: There are two option when install SecurePath with version 3.0F:
1. For Active-Passive Disk array
2. For Active-Active disk array

The error only happen when I choose option 2.

It is normal if I install option 1.

Please see on the attachment for detail error.

Does anyone know this trouble?
Thanks in advance.
B&R
Hoang Chi Cong

[Michael Steele_2]

Found just the thing:

http://www2.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000079687794

The problem was fixed after installation of the following items:

ULM-SERVICE B.11.11.01 SCSI Upper Layer Module Service (Dec2004, Disk1)

Patches PHKL_32670 and Patch PHKL_30257 s700_800 11.11 Fibre Channel Mass
Storage Patch

[Sameer_Nirmal]

I think you are using SecurePath 3.0F SP2
SP for Active-Active Arrays on HPUX 11.11 requires SCSI ULM service installed.
Check out the SP CD for the ULM bundle.
Refer this link
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00248508/c00248508.pdf

Then you may need install the ULM patch as mentioned in the above document.

Once ULM is installed, the kernel rebuild should work.