Logs after shutdown server

[Mousa55]

Hello
i have 2 server(rp8420) contain 4 partitions and i am
shutdown all the partition and i disconnected the power supply of the server and then i connected a power supply to server then all the partition come up. after that im getting logs events in all servers i am attachment the logs. what may be the problem, and further the attention LED it is ON and Remote LED it is OFF. please help me to resolve this issue.
thanks and best regards

[Steven E. Protter]

Shalom,

Any time a server loses power, in this case due to your temporary disconnect an attention event is recorded.

Log into console

ctrl-b
sl
Read through the events one by one and your attention light will go off.

SEP

[Mousa55]

hello

i am forget to attach the file

thanks

[Prashanth.D.S]

Hi Nejad,


Description:

The cabinet's Ambient Air Sensor detected a change in air temperature crossing to the mid range. The air temperature may be rising or falling. This is just a reporting of entering the over-temp-mid range..

Cause / Action:

Room Temperature is rising or falling.

It seems some kind of temp issue at site, would recommed you to check the AC temp inside the server room.

Also attach the MP:CM>ps output to check if there are any fan failures..

Best Regards,
Prashanth

[Eric Jacklin · Accepted solution]

Hi

After server reboots your should get some comman message you have to read and give the acknowlege the same also.

So go to GSP > SL and select E for error log

read all the message care fully and Acknowlege them

Onces your read them all your problem will get reloved.