HPE Community
Operating System - HP-UX
1833788 Members
2116 Online
110063 Solutions
New Discussion

Network Interface Cards displaying two enteries for every lan interface.

 
SOLVED
Go to solution
John E. Goetz
Frequent Advisor

‎09-20-2007 02:05 AM

‎09-20-2007 02:05 AM

Network Interface Cards displaying two enteries for every lan interface.

Just upgraded to 11.23 and in SAM under Network Interface Cards displays double enteries for each lan interface. One showing IPV6 Not Configured as a status.
0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎09-20-2007 02:22 AM

‎09-20-2007 02:22 AM

Solution

Re: Network Interface Cards displaying two enteries for every lan interface.

This is normal, now you can configure the NIC for IPv4 or IPv6 if you like - don't worry.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.