permission error when executing cmapplyconf

[EJ Stremler]

Has anyone encountered this error when modifying the cluster configuration using cmapplyconf? I would like to understand what the syslog message means below...

Any help would be appreciated..

Thanks,

Ed
------------------------------
Modify the cluster configuration ([y]/n)? y Marking/unmarking volume groups for use in the cluster 0%----10%----20%----30%-Modifying the cluster configuration for cluster NUSHP2.
Modifying the package configuration for package dap023-fe.
Modifying the package configuration for package dap021-fe.
Modifying the package configuration for package dap019-fe.
Error: Permission denied accessing node da1250.
Error: Unable to initialize Volume Group /dev/db2301 on node da1250.
Check the syslog file on that node for more information.
cmapplyconf : Unable to apply the configuration
------------------------------------------
syslog:
Jan 31 10:28:58 da1250 cmclconfd[1771]: WARNING: User (root) from ip address (192.168.195.243) does not have privileges to execute command 34. Somebody may be attemptin g un-authorized access to this system.

[Jeff_Traigle]

Make sure the node is in /etc/cmcluster/cmclnodelist

[Geoff Wild]

You need have all nodes in /etc/cmcluster/cmclnodelist

Rgds...Geoff

[melvyn burnard]

Looks like you are using SG 11.16?

If so, you need to verify your security settings, as SG 11.16 onwards does not use cmclnodelist once teh cluster has been created.
Take a read of:
http://docs.hp.com/en/B3935-90078/B3935-90078.pdf
http://docs.hp.com/en/6283/SGsecurityfiles.pdf
http://docs.hp.com/en/5874/securingserviceguard_nov2005.pdf

[Chan 007]

Sometimes, when you are doing such apply in those versions, you need to add entry in .rhosts for all servers.

Chan

[Mridul Shrivastava]

In addition to it all the files should be at both the nodes and they should be identical.Do take care of permissions before executing the cmquerycl...