rx7640

[Muhammad Tariq]

Hi,
I am very new in npar, vpar & HP-UX so I need some step by step guidelines for:
1) configuring 4 partitions on rx7640, the rx7640 is with two cell board and with redundant core I/0
2) installation guidelines for HP-UX 11.23 on each vpar.

Thanks and regards.
Muhammad Tariq

[Patrick Wallek]

Any information you need regarding these issues should be available from:

http://docs.hp.com

[Muhammad Tariq]

Hi Patrick,
Many thanks for the response, In fact I already gone through the doucement available from docs.hp.com i.e. about n-par and v-par but still I am not able to understand the step required to configure n-par and then vpar.
regards.
Muhammad Tariq

[Jaime Bolanos Rojas.]

Muhammad,

First you want to go through this document:

http://docs.hp.com/en/5991-3684/npartition.pdf

It will tell you what you need to know about npars, then you can go over vpars which might be easier but that is later.

Regards,

Jaime.