Server info. L3000

[Ahmed_58]

Hi,
Can some tell me how to find out the following for HP L3000.

The total number of memory
The number of free memory slots
Can it handle additional memory extender?
Server model the part number of memory that is compatible with it.

Thanks, Ahmed

[Peter Godron]

Ahmed,
on the L3000 (rp5470):
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=177698
and
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=848179
and more general info:
http://docs.hp.com/en/hw.html#HP%209000%20rp5400%20Series%20Server%20%28L-Class%29

[Ahmed_58]

I think there is a utility where can check the number of slots used/available etc.

Ahmed

[Torsten.]

Run the stm info tool to get information about the current configuration:

echo "selclass qualifier memory;info;wait;infolog" | /usr/sbin/cstm

[Ahmed_58]

Ho Torestn,
it seems the utility is not working for me, I'm getting:

cstm>selclass qualifier memory;info;wait;infolog
^-- (SelClass) is currently disabled. --

cstm>#.

Regards,
Ahmed

[Torsten. · Accepted solution]

You can also try to use mstm or xstm, select the memory item and run the info tool.
You will get an information like this:

Extender
Slot Num Configured and Slot label for each DIMM (MB)
-------- --------------------------------------------
0a 2a 1a 3a 3b 1b 2b 0b
---- ---- ---- ---- ---- ---- ---- ----

EXT 0 256 512 256 0 0 256 512 256
------------------------------------------------------
System Total (MB): 2048


In this example there is only 1 extender, slots 0,1,2 are loaded, slot 3 is free.

[Steven E. Protter]

Shalom Ahmed,

You may need to install the latest online diagnostics from http://software.hp.com to make the cstm commands work.

They are based on the menu system of cstm, which is changed from time to time.

SEP