Tombstones Question

[Brooks Sizemore]

I am getting the following errors when booting the system:
(This output comes from "/sbin/rc1.d/S430pdcinfo start" in /etc/rc.log)

pdcinfo: ioctrl( diag_fd, DIAG_PROC_HPAS, ... ) failed. : Invalid argument
pdcinfo: pdcinfo_main.c:445
ERROR: pdcinfo returned error status=255

What is happening here? I have checked in /etc/rc.config.d/pdcinfo to make sure that pdcinfo is on.

Thanks!

[Denver Osborn]

unfortunately pdcinfo isn't supported, it was mistakenly included in a few releases of diagnostics.

You can turn it off by editing /etc/rc.config.d/pdcinfo, change PDCINFO=1 to PDCINFO=0.

For details please have a look at ITRC Technical Doc ID KBRC00000655.

hope this helps
-denver

[Pedro Sousa]

Hi Brooks!
check this thread:
http://forums.itrc.hp.com/cm/QuestionAnswer/1,1150,0x5aab79bffde7d4118fef0090279cd0f9,00.html

good luck.

[Jim Moffitt_1]

It also could be that there's an invalid argument in /sbin/init.d/pdcinfo

[melvyn burnard]

What system is this running on?
Some 9000 systems do not support the pdcinfo stuff.
You may also want to check and see if you have the latest version as there was a patch for this.