vgcfgrestore

[hpux_sun]

can you please tell me why do we use vgcfgrestore, please tell me when and where we have to use vgcfgrestore command?

[Torsten.]

Usually you use vgcfgrestore if you replace a physical disk to restore the LVM layout to the new disk (not the data).

[James R. Ferguson · Accepted solution]

Hi:

Most generally, 'vgcfgrestore' is used when you have replaced a physical disk due to a failure.  You might want to look at:

http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c01911837/c01911837.pdf

Regards!

...JRF...

[hpux_sun]

Many Thanks , now i clearly understood.

[James R. Ferguson]

---

@hpux_sun wrote:

Many Thanks , now i clearly understood.

---

Marking a post "solved" is very valuable to future readers.  However, it's also appropriate to award kudos to all responses that helped:

http://h30499.www3.hp.com/t5/help/faqpage/faq-category-id/kudos#kudos

Regards!

...JRF...