Operating System - HP-UX
1835983 Members
2512 Online
110088 Solutions
New Discussion

Re: what should be done after nettune

 
lei
New Member

what should be done after nettune

A little help needed, folks.
I got a long list of routing table on a 10.20 box, their flags are shown as UGHD.
I set the pmtu to 0 by command nettune -s tcp_pmtu 0
However when I ping any host, it still come out with a UGHD entry in the routing table.
May I have to do /sbin/init.d/net stop; /sbin/init.d/net start after I run the nettune?

Any idea is welcomed.
Thanks & have a good day
Lei
lei
7 REPLIES 7
harry d brown jr
Honored Contributor

Re: what should be done after nettune

Lei,

Please read this thread, it clearly explains your issue and how to correct it.

live free or die
harry
Live Free or Die
Jeff Schussele
Honored Contributor

Re: what should be done after nettune

Link Harry?

Oops he said,
Jeff
PERSEVERANCE -- Remember, whatever does not kill you only makes you stronger!
harry d brown jr
Honored Contributor

Re: what should be done after nettune

http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0xe25f37f45ef7d4118fef0090279cd0f9,00.html

Thanks Jeff, I guess I popped my last brain cell lifting an N-class into a cabinet today. 240 pounds! Thank god it wasn't heavy!


live free or die
harry
Live Free or Die
lei
New Member

Re: what should be done after nettune

Hi folks,

I read this before, so I tried these things Berlene mentioned.
Am I missing some important points? I flushed the routing table, checked netconf file and disable the PMTU Discovery process; but the UGHD routes come out again.
Any help?

Thanks & have a good day
Lei
lei
harry d brown jr
Honored Contributor

Re: what should be done after nettune

From the link Berlene said this:

You can turn this off at the router, run a cron job to flush the routing tables or turn off defrag with nettune.

live free or die
harry
Live Free or Die
lei
New Member

Re: what should be done after nettune

Hi Harry,

I am not going to corrected the routers because many routers are involved.
I can do the flush periodically, however what Berlene said was "... or turn off defrag with nettune."
So I think turn off the defrag should correct the problem. What I am also asking is how can I make sure nettune works? Any further steps?
Correct me if I am wrong.

Thank you for your time
lei
lei
lei
New Member

Re: what should be done after nettune

After testing, I found out that it was the router as the default gateway, caused the HP-UX server to add a dynamic route entry into local routing table.

The solution could be disabling ICMP redirect on the default gateway.

Thanks to everyone who made their input to this message.

have a good day
lei
lei