why cant i start this session?

[thebeatlesguru]

/opt/dce/sbin/rpcd

i cant start it,after i used this cmd ,
#ps -ef |grep dced
root 17453 17424 0 09:50:20 pts/te 0:00 grep dced

nothing happened,whats wrong?

[Jeff Schussele]

Hi,

DCE is normally started using
/sbin/init.d/dce start
assuming you've used dce_config or SAM to configure DCE first as they will edit /etc/rc.config.d/dce to setup just what starts & how.

Rgds,
Jeff

[thebeatlesguru]

/sbin/init.d/dce start
Beginning DCE startup...
NOTE: No components of DCE are configured.

Finished DCE startup.


still cant start it ,but on another box which is same to this one, i can start the session

so strange?

[T G Manikandan]

Just check the log files whether there have any clues for the problem in startup.

The log files are located at
/var/opt/dce/svc

check the time stamp to find whether they have got updated recently

[thebeatlesguru]

error.log:
2002-12-05-01:36:02.946+00:00I----- dced ERROR dhd general main.c 1320 0x7f778518 Process (pid 17385) exited with status 01
2002-12-05-01:43:03.287+00:00I----- dced ERROR dhd general main.c 1320 0x7f778518 Process (pid 17405) exited with status 01

fatal.log:
2002-12-05-01:36:02.830+00:00I----- dced FATAL dhd general main.c 718 0x7f778518 Cannot use '*all*' protocol sequence, Permission
denied
2002-12-05-01:43:03.259+00:00I----- dced FATAL dhd general main.c 718 0x7f778518 Cannot use '*all*' protocol sequence, Permission
denied
2002-12-05-01:50:12.677+00:00I----- dced FATAL dhd general main.c 872 0x7f778518 Initialization (global data) failed, status=0x000
0ff03.

i dont know what it means,what can i do?

[U.SivaKumar_2 · Accepted solution]

Hi,

#/opt/dce/sbin/rpcd

#ps -ef | grep rpcd

it should be running now

regards,
U.SivaKumar

[thebeatlesguru]

yep,its running now

but why?

i have tried this cmd several time ,but it didnt work

[U.SivaKumar_2]

Because my friend
You have grep rpcd not dced .

regards,
U.SivaKumar