Operating System - Linux
1832541 Members
6133 Online
110043 Solutions
New Discussion

bind 9.2.1 on hp-ux 10.20

 
nikolaii
Advisor

bind 9.2.1 on hp-ux 10.20

Hi all,
I have successfully compiled and installed bind 9.2.1 on my hp-ux 10.20, but now the system gets in trouble when I try to use the DNS service, because the whole system was configured with the bind version shipped with hp-ux 10.20 ! I think I must adjust the different links to the named daemon (which resides in /usr/local/sbin/ )and other, but maybe there is something else, or ?
If someone have experienced such a thing ....
1 REPLY 1
Steven E. Protter
Exalted Contributor

Re: bind 9.2.1 on hp-ux 10.20

You need to swremove the current version of bind.

swremove -i

look for the service which is probably called named

Remove it, if need be reboot the system. Then you'll need to configure the BIND 9.2.1 according to the attached instructions.

Suprigingly, I can't find depots for 10.20 on HP's site for the public domain site.

Which explains why you had to compile and install the 10.20 version. It would appear however that HP doesn't support Bind 9.2 on that OS. I may be wrong, but you'll have to check with HP on that one.

The swremove will work though, I've done it.

P

Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com