Installing tru64 for the first time

[raven_8]

through a terminal server. At the first prompt (>>>) everything is fine. After starting the install (boot dqb0), every time I hit once, it is sent twice. So I can't get past where it asks if this is an "installation with worldwide language support" Help please.

[raven_8]

So, during the installation, + is a standard anyone know why this may be?

[Ravi_8]

Change the keyboard,

I don't press ctrl+enter for .

keyboard might be faulty

[Mobeen_1]

Raven,
I would go with Ravi, cannot think of why that should happen other than a faulty keyboard :)

rgds
Mobeen

[Han Pilmeyer]

How are you connecting to the terminal server?

I assume you're connecting to the terminal server using a console management program or something more simple such as a telnet connection. I've noticed in my conserver logs that somewhere during the boot process, and start echoing differently. You could be seeing something similar as a result of that. I would check the terminal server settings for the port, the telnet settings and possibly the console server software.

I doubt that the keyboard you're using has anything to do with this, since it probably works fine on the PC or system or whatever that you are connecting from, right?

[raven_8]

Han is right.
1) Keyboard works fine in windows, works fine when connected to the box BEFORE installation, sux after I start the installation.

2) I am using a terminal server to connect to the box, I telne tto the terminal server, and it has a serial connection back to the box, connected @ COM 1

3) I tried diddling with the / settings (along with echo, inbound control settings, outbound control settings, pretty much anything and everything I could think of). Still couldn't make it work right.

Oh well, OS is up, I configured groups/users now I'm off to figure out the partitioning. Thanks guys.

[raven_8]

moving on