HPE Community
ProLiant Deployment and Provisioning
1834935 Members
2335 Online
110071 Solutions
New Discussion

Re: WinPE 2.0 injecting BroadCom Drives

 
Michael W Jones
Occasional Contributor

‎04-14-2009 06:34 AM

‎04-14-2009 06:34 AM

WinPE 2.0 injecting BroadCom Drives

I have been trying to use WinPE 2.0 to boot a DL380G5 for scripting but Winpe does not see the NIC cards. I have tried injecting drivers from BroadCom for XP and Win2000 with no success. Has anyone had any luck with WinPe 2.0 and the newer HP servers?
0 Kudos
2 REPLIES 2
Rixtrix
Occasional Advisor

‎06-09-2009 03:33 AM

‎06-09-2009 03:33 AM

Re: WinPE 2.0 injecting BroadCom Drives

did you solve the problem i have the same fault
0 Kudos
Michael W Jones
Occasional Contributor

‎06-09-2009 04:32 AM

‎06-09-2009 04:32 AM

Re: WinPE 2.0 injecting BroadCom Drives

I was injecting the drivers incorrectly. The HP Scripting toolkit has the drivers for PE 2.0 and a sample batch file for creating the boot disk. You also have to modify Startnet.com to load the OEM drivers after PE 2.0 has booted.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.