ProLiant Servers (ML,DL,SL)
1826301 Members
4414 Online
109692 Solutions
New Discussion

Battery replacement failure

 
testmado662
Regular Advisor

Battery replacement failure

Hi all,

After battery failure on DL server, replacement battery don't works and always in default. View attached

  • Few new batteries was installed
  • Before replacement, batteries was tested and worked.

Does somebody encountederd that problem ?

Thanks for Help

 

image.png

5 REPLIES 5
testmado662
Regular Advisor

Re: Battery replacement failure

I don't know if attached snpshot can be read. I repost snapshot

 

2022-02-24 - HPE DL Battery error.jpg2022-02-24 - HPE DL Battery error (2).jpg

support_s
System Recommended

Query: Battery replacement failure

System recommended content:

1. Sun Storage Tek Disk Array - Battery Failure Issue How to Determine if a Battery Needs to be Replaced

2. Sun Storage Tek Disk Array - Battery Failure Issue How to Determine if a Battery Needs to be Replaced

 

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

 

Thank you for being a HPE valuable community member.


Accept or Kudo

testmado662
Regular Advisor

Re: Query: Battery replacement failure

Thanks for reply

TVVJ
HPE Pro

Re: Query: Battery replacement failure

Hello,

You may refer to section "Configuring controller cache" in the HPE Smart Storage Administrator User Guide, page 37 for steps to enable the cache.

Regards,



I work at HPE
HPE Support Center offers support for your HPE services and products when and how you need it. Get started with HPE Support Center today.
[All opinions expressed here are mine, and not official statements on behalf of Hewlett Packard Enterprise]
Accept or Kudo
Sham82
HPE Pro

Re: Query: Battery replacement failure

Hi,

 

Since You have already replaced the Battery.

 

- Please make sure that the Cache, Battery/Capacitor and cable is properly seated. 
- Clean the cache tray to ensure the contact surface are not corroded.

- Battery / Capacitor is selected based on the type of Cache Module populated on the server. Hence please check whether its BBWC or FBWC: ( Make sure you have replaced it with the Crrect Part.)
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c01682458

- The Cache could be disabled as Battery may not be charged completely.
- Please review the ADU Report > Consolidated Error Report and check whether the Cache is temporarily or permanently disabled. A Permanently disabled message indicates Cache Failure.

 

- If the Issue is still not fixed , you would need to replace Both Cache and Battery in one go.

 

This issue needs further diagnosis by the Hardware Support Team. Please call the Level 1 Support Line for Warranty Support and share the ADU Report before replacing any further hardware on the server.
https://www.hpe.com/us/en/contact-hpe.html

Regards,
HPE



I work at HPE
HPE Support Center offers support for your HPE services and products when and how you need it. Get started with HPE Support Center today.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
Accept or Kudo