HPE Community
ProLiant Servers (ML,DL,SL)
1849000 Members
7266 Online
104040 Solutions
New Discussion

Re: cannot boot using smartstart cd

 
Ayman Altounji
Valued Contributor

‎04-15-2002 04:00 PM

‎04-15-2002 04:00 PM

cannot boot using smartstart cd

I have Proliant 5500 (P2 type, bios date 11 Aug 2000) with smart 3200 controller (firmware right now is 4.5 A). My problem is I cannot use smart start CD to reconfigure the server. I already used NVRAM erase using maintainance switch jumper and also use eraser utility to erase all the configuration. But still It cannot recognize the CD. CD ROM is working well. First time can reach the RAID configuration part then cannot boot up. Any suggestion? Also all the SCSI hardisk already upgrade the firmware to the latest one.
0 Kudos
Reply
2 REPLIES 2
Ayman Altounji
Valued Contributor

‎04-25-2002 04:00 PM

‎04-25-2002 04:00 PM

Re: cannot boot using smartstart cd

It sounds like I'm having the same problem with a 5500 using SmartStart 5.3.
Did you ever get a resolution ? Thanks.
0 Kudos
Reply
Ayman Altounji
Valued Contributor

‎04-26-2002 04:00 PM

‎04-26-2002 04:00 PM

Re: cannot boot using smartstart cd

Hi, need to change the motherboard card (attach to vga, keyboard, etc). It will work and the bios set back to old one (1999). Hope you still have waranty.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.